Thank you Joshua. I will make the modifications this morning and give it a try.
Have a great day! Dan -----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Joshua Colp Sent: Wednesday, December 10, 2014 7:27 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] PJSIP configuration question <snip> > > I translated those settings to the following for pjsip.conf... > > [transport1] > type = transport > bind = 0.0.0.0 > protocol = udp > > [outbound.vitelity.net] > type = aor > remove_existing = yes > contact = sip:64.2.142.93@5060 This is incorrect. The contact should be: contact = sip:64.2.142.93 It will use a default port of 5060. I also believe I've covered your origination issue in a separate email. Your dial string should be: PJSIP/8005555...@outbound.vitelity.net Cheers, -- Joshua Colp Digium, Inc. | Senior Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - US Check us out at: www.digium.com & www.asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users