On 2 February 2015 at 15:12, Joshua Colp <[email protected]> wrote: > Sunny wrote: > >> Hello, >> >> >> In Asterisk 11 it is possible to set extensions on DB table (sipppers) >> and also in sip.conf. >> >> But in Asterisk 13 apparently this is not possible: as I tried to set in >> ps_endpoints and also in pjsip.conf but only the realtime endpoints are >> loaded. >> >> Is there a way to use realtime + static modes at the same time for the >> ps_endpoints lookup using PJSIP. >> > > Yes. The sorcery.conf file controls this and allows specifying multiple > things. It would be like follows: > > [res_pjsip] > endpoint=realtime,ps_endpoints > endpoint=config,pjsip.conf,criteria=type=endpoint > > Realtime will get queried first followed by the configuration file. If you > want to change the order then swap their placement. > > Cheers, > > -- > Joshua Colp > Digium, Inc. | Senior Software Developer > 445 Jan Davis Drive NW - Huntsville, AL 35806 - US > Check us out at: www.digium.com & www.asterisk.org > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
Yeah, it works now. Thank you Joshua! However I'm getting following error: [2015-02-02 16:55:56] ERROR[32605] res_sorcery_config.c: Could not create an object of type 'endpoint' with id '192.168.1.3' from configuration file 'pjsip.conf' my endpoint is defined as: [192.168.1.3] type = endpoint transport=simpletrans context = inbound dtmf_mode = inband disallow = all allow = alaw allow = ulaw aors = 192.168.1.3 Thanks,
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
