Le 18/02/2015 18:52, Eric Wieling a écrit :
I solved the issue by not answering the call as I assume others have done.
The only solution we found is to set faxdetect=no in the sip.conf of the peer definition. The Set(FAXOPT(detect)=[yes|no]) command in the dialplan is not taken in account.
The problem with this solution is that we can't mix fax reception with direct fax line and fax detection on audio line. Or better said, to use a mix of those detection, we should put a Wait(x) in the fax direct DID and systematically use the fax extension to dial hylafax like
[FAXDirectDID] exten = fax,1,Dial(IAX2/300,,) same = n,Hangup exten = _X.,1,Wait(10) same = n,Congestion() Not particulary clean. Daniel
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Administrator TOOTAI Sent: Wednesday, February 18, 2015 12:50 PM To: [email protected] Subject: Re: [asterisk-users] Res_fax - FAXOPT(faxdetect) Hello Le 17/02/2015 17:00, Administrator TOOTAI a écrit :Hi, as stated in the documentation, it's allowed to set FAXOPT(faxdetect)=yes/no to allow fax detection. It's done (see below) but still fax detection :-( Extension 300 is hylafax with iaxmodem. On the upper Asterisk gw it's the same, despite the faxdetect set to no we also have the NOTICE of T.38 re-INVITE. Test is done with a mobile phone calling the 0123456789 PSTN number. -- Executing [0123456789@from-internal:1] Set("SIP/TOOTAi-00008262", "FAXOPT(faxdetect)=no") in new stack -- Executing [0123456789@from-internal:2] Macro("SIP/TOOTAi-00008262", "Fax") in new stack -- Executing [s@macro-Fax:1] Dial("SIP/TOOTAi-00008262", "IAX2/300,,") in new stack -- Called IAX2/300 -- Call accepted by 127.0.0.1 (format alaw) -- Format for call is (alaw) -- IAX2/300-7211 is ringing -- IAX2/300-7211 answered SIP/TOOTAiAudio-00008262 == Using UDPTL TOS bits 184 == Using UDPTL CoS mark 5 [2015-02-17 16:52:51] NOTICE[3467][C-00001d5b]: chan_sip.c:10645 process_sdp: T.38 re-INVITE detected but no fax extension [2015-02-17 16:52:56] WARNING[3467][C-00001d5b]: chan_sip.c:9868 process_sdp: Insufficient information for SDP (m= not found) -- Executing [h@from-internal:1] Hangup("SIP/TOOTAi-00008262", "") in new stack == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/TOOTAi-00008262' -- Hungup 'IAX2/300-7211' Thanks for your supportNo one have an idea on this ?
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
