Hello All, I have an Asterisk server v13.1.0 running on EC2 and I am able to connect and register SIP devices and "see" them on the asterisk CLI. I am also able to place calls, but I am not able to hear any audio on either end after the call is picked up.
I was wondering if you can tell me what a minimal configuration for Asterisk on EC2 looks like. My current pjsip.conf configuration looks like this: type=transport protocol=udp bind=0.0.0.0 local_net=172.31.32.0/20 ; In the following two lines, replace "<publicIP>" with the output of ; curl -s http://169.254.169.254/latest/meta-data/public-ipv4 external_media_address=<publicIP> external_signaling_address=<publicIP> [endpoint_internal](!) type=endpoint context=from-internal disallow=all allow=ulaw direct_media=no [auth_userpass](!) type=auth auth_type=userpass [aor_dynamic](!) type=aor max_contacts=1 remove_existing=yes ;Definitions for our phones, using the templates above ;; usernames and passwords etc. below My security group configuration allows TCP, UDP posrt 5060 inbound, outbound from/to 0.0.0.0/0 and TCP, UDP ports 10000-20000 from/to 0.0.0.0/0. Should I turn on STUN for my zoiper softphones? Any specific flavor? What am I doing wrong? Any help appreciated.
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
