07.03.2015 0:24, Kevin Harwell пишет:
On Fri, Mar 6, 2015 at 2:06 PM, Dmitriy Serov <[email protected]
<mailto:[email protected]>> wrote:
Hello.
Asterisk 13.2.
I transfer configs from chan_sip to res_pjsip.
In chan_sip i have "match_auth_username=yes" and have nothing in
pjsip.
I have a lot of endpoints and registrations on same SIP server.
And it's problem in pjsip now. Is not it?
I requesting to add new value for endpoint option identify_by. The
value 'uri'.
Simple config (cutted):
[siptrunk]
type=registration
transport=udp-transport
outbound_auth=siptrunk
server_uri=sip:sip.example.com <http://sip.example.com>
client_uri=sip:[email protected]
<mailto:client_uri=sip:[email protected]>
retry_interval=60
contact_user=siptrunk-in
[siptrunk-in]
type=endpoint
transport=udp-transport
context=from-trunk
disallow=all
allow=ulaw
outbound_auth=siptrunk
aors=siptrunk
identify_by=uri
Registration section has option "contact_user". Incoming call from
this registration will be INVITE sip:siptrunk-in@....
I offer to change res_pjsip_endpoint_identifier_user to realize
endpoint identification by sip uri.
I think it will be usefull.
P.S. i hope issues will be rejected:
https://issues.asterisk.org/jira/browse/ASTERISK-22306 and SWP-6069
Dmitriy Serov
-
I believe what you are looking for is already available. See the
"identify" type (type=identify) section that is in the pjsip.conf file
and the "identify" option for endpoints. These allow you to identify
and endpoint by IP address.
For more information see the pjsip.conf.sample file. Also take a look
at configuring Asterisk for res_pjsip [1] specifically the part about
configuring endpoint identification by IP address [2]. If you run into
problems more information can also be found in the res_pjsip
troubleshooting guide [3], specifically the section on "identify by IP
address"
[1] https://wiki.asterisk.org/wiki/display/AST/Configuring+res_pjsip
[2]
https://wiki.asterisk.org/wiki/display/AST/Asterisk+12+Configuration_res_pjsip_endpoint_identifier_ip
[3]
https://wiki.asterisk.org/wiki/display/AST/Asterisk+PJSIP+Troubleshooting+Guide
Hope that helps,
--
Kevin Harwell
Digium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at:http://digium.com &http://asterisk.org
Thank you for answer. But...
ones again: I have a lot of endpoints and registrations on same SIP
server. And it's problem in pjsip now. Is not it?
Simple Example. I have two trunks with their own credentials (and did)
to the same sip server:
- for home
- for bussiness
[home-example.com-endpoint]
[bussiness-example.com-endpoint]
[home-example.com-registration]
contact_user=home-example.com-endpoint
[bussiness-example.com-registration]
contact_user=bussiness-example.com-endpoint
;and ok... i wrote identify by IP section
[example.com-identify]
type=identify
match=example.com
endpoint= ???
It is very! important for me to know what trunk passes through the
incoming call: home or bussiness.
1. Identify by IP. Do you have answer?
2. Identify by username. What? I can't make endpoints to all of my contacts.
Ok. I can use contact_user in registraction and route incoming call by
INVITE uri.
Can i?
Dmitriy Serov
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
