On Thu, Mar 12, 2015 at 5:11 PM, Chirag Desai <[email protected]> wrote: > > >> From: Matthew Jordan <[email protected]> >> >> >> >> If the INVITE request is not shown in the CLI with 'pjsip set logger >> >> on', then Asterisk is not actually receiving the request. >> >> >> >> Does a pcap show the message being sent to the correct IP/port? If you >> >> change the transports to bind to port 5060, does that change anything? >> >> > >>The sip message I included in my last message is what I see when I ngrep on >> 5061, but >asterisk doesn't see it. When I tell Kamailio to send the message >> to 5060 chan_sip shows >the invite in the CLI. >> >> My setup has chan_sip running on 5060 and pjsip (tcp and udp on 5061). >> >> I'll get PJSIP running on 5060 and see if that makes any difference. > > UPDATE: I got PJSIP on 5060 and everything is working fine as expected and I > can see the calls from Kamalio. Is this a bug with asterisk not recognising > the traffic on 5061 even though the SIP messages are being received by the > server on that port and I can see it? >
I suspect not. We run the PJSIP stack on multiple ports quite often. I would guess that there's something else going on here. -- Matthew Jordan Digium, Inc. | Director of Technology 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: http://digium.com & http://asterisk.org -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
