On Sun, Mar 15, 2015 at 10:34 AM, Sonny Rajagopalan < [email protected]> wrote:
> That was the issue, thanks. I now am able to get the caller ringing on an > outbound call, but an external phone number (E164) I am dialing does not > ring. > Any error messages? If you set 'core set verbose 3' and try it, does the Dial get executed? > > On Sun, Mar 15, 2015 at 12:19 PM, George Joseph < > [email protected]> wrote: > >> >> >> On Sun, Mar 15, 2015 at 8:32 AM, Sonny Rajagopalan < >> [email protected]> wrote: >> >>> I have setup my Asterisk 13.1.0 server with PJSIP on AWS/EC2. My basic >>> configuration works, and I am connected to a SIP trunk using SIP.US, >>> and have set up my inbound calling which works correctly (when I call my >>> PBX DID, the call does come into my PBX network). >>> >>> The issue is that I am not able to make outbound calls, because the call >>> fails with the error: >>> >>> res_pjsip_outbound_authenticator_digest.c:125 >>> digest_create_request_with_auth: Unable to create request with auth.No auth >>> credentials for any realms in challenge. >>> >>> CLI> pjsip show endpoint sonnyGW1 >>> >>> ... >>> ========================================================================================= >>> >>> Endpoint: sonnyGW1 Not in use >>> 0 of inf >>> OutAuth: sonnyGW1_auth/sonny >>> Aor: sonnyGW1 0 >>> Contact: sonnyGW1/sip:65.254.44.194:5060 Unknown >>> nan >>> Transport: transport-udp udp 0 0 0.0.0.0:5060 >>> Identify: sonnyGW1/sonnyGW1 >>> Match: 65.254.44.194/32 >>> >>> My pjsip.conf is as below >>> >>> [sonnyGW1] >>> type=registration >>> transport=transport-udp >>> outbound_auth=sonnyGW1_auth >>> server_uri=sip:gw1.sip.us >>> client_uri=sip:[email protected] >>> contact_user=sonny >>> retry_interval=60 >>> forbidden_retry_interval=600 >>> expiration=3600 >>> >>> [sonnyGW1_auth] >>> type=auth >>> auth_type=userpass >>> password=somepassword >>> username=sonny >>> realm=gw1.sip.us >>> >> >> You probably need to remove the 'realm' line so that it will match any >> realm in the challenge. >> >> >>> >>> [sonnyGW1] >>> type=aor >>> contact=sip:65.254.44.194:5060 >>> >>> [sonnyGW1] >>> type=endpoint >>> transport=transport-udp >>> context=gateway1 >>> allow=!all,ulaw >>> outbound_auth=sonnyGW1_auth >>> aors=sonnyGW1 >>> >>> [sonnyGW1] >>> type=identify >>> endpoint=sonnyGW1 >>> match=65.254.44.194 >>> >>> My extensions.conf stub for the appropriate section looks like this >>> (from https://wiki.asterisk.org/wiki/display/AST/Dialing+PJSIP+Channels) >>> : >>> >>> exten => _9XXXX.,1,Log(NOTICE, Dialing out from ${CALLERID(all)} to >>> ${EXTEN:1} through gateway1) >>> exten => _9XXXX.,n,Dial(PJSIP/${EXTEN:1}@sonnyGW1) >>> ; Have also tried >>> ; exten => _9XXXX.,n,Dial(PJSIP/sip:${EXTEN:1}@65.254.44.194:5060) >>> exten => _9XXXX.,n,Playtones(congestion) >>> exten => _9XXXX.,n,Hangup() >>> >>> I do know that this code is being executed as I see the log in the first >>> line above. >>> >>> Have I correctly set up authentication for outbound calling? >>> >>> Any help appreciated. Thanks! >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
