Dear Asterisk-Users,
By means of Asterisk 11 and sip.conf, I got success implementing early media.
That is, all information that come from callee (SIP 183 message/ SDP) is passed
to the caller without any modification in the SDP body.
However, in Asterisk 13 and using pjsip.conf I'm still failing to do the same
thing. See:
Softphojne1 <------------------------------------------------> Asterisk
<--------------------------------------->Softphone2
| ----------------------SIP INVITE ------------------------>|
| ----------------------------SIP INVITE------------>|
.
.
.
.
.
.
.
.
|<----------SIP 183 ---------------------------------|
SDP : Media Description, name and address (m): audio 4000
RTP/AVP 8 96
Media Description, name and address (m): video
5000 RTP/AVP 97
|<--------------------------SIP 183-----------------------------|
SDP :Media Description, name and address (m): audio 13258 RTP/AVP 8
96
Media Description, name and address (m): video 16002
RTP/AVP 97
So, there is bit modification in SDP body, caused by Asterisk. As long as I'm
intending to implement direct media, I believe that Asterisk 13 has some
special configuration to be done in PJSIP.conf file, that will allow things
work very well again, as in Asterisk 11 and sip.conf.
How to configure pjsip.con file or Asterisk, to run direct-media? Or , where to
find a tutorial about it on Internet?
Any hint will be very helpful!
Thanks a lot.
RODRIGO PIMENTA CARVALHO
Inatel Competence Center
Software
Ph: +55 35 3471 9200 RAMAl 979 (Brasil)
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
