Hello everyone, I have some problems to enable push the Zoiper
Windows Phone in my Asterisk 11.
Below is the result of CLI
== Using SIP RTP CoS mark 5
-- Executing [1033@ramais:1] Answer("SIP/1030-00000201", "") in new stack
> 0x7efc90024190 -- Probation passed - setting RTP source
address to 179.XX.XXX.XX:57741
[Feb 29 12:32:28] NOTICE[4348][C-000001ce]: res_rtp_asterisk.c:4441
ast_rtp_read: Unknown RTP codec 95 received from '179.XX.XX.XX:57741'
> 0x7efc90024190 -- Probation passed - setting RTP source
address to 179.XX.XX.XX:57741
-- Executing [1033@ramais:2] Set("SIP/1030-00000201", "location=")
in new stack
-- Executing [1033@ramais:3] Verbose("SIP/1030-00000201", "0,
getting push info ") in new stack
getting push info
-- Executing [1033@ramais:4] Set("SIP/1030-00000201",
"regx="X-PUSH-URI=([0-9a-zA-Z\.\:\/\_]+)"") in new stack
-- Executing [1033@ramais:5] Set("SIP/1030-00000201", "push=") in new stack
-- Executing [1033@ramais:6] System("SIP/1030-00000201",
"/usr/bin/push.sh ") in new stack
-- Executing [1033@ramais:7] Wait("SIP/1030-00000201", "1") in new stack
-- Executing [1033@ramais:8] Dial("SIP/1030-00000201", "SIP/1033")
in new stack
[Feb 29 12:32:29] WARNING[4348][C-000001ce]: app_dial.c:2437
dial_exec_full: Unable to create channel of type 'SIP' (cause 20 -
Subscriber absent)
== Everyone is busy/congested at this time (1:0/0/1)
-- Auto fallthrough, channel 'SIP/1030-00000201' status is 'CHANUNAVAIL'
asterisk*CLI>
I've created the file more push.sh qualification in the dialplan. But the
Windows Phone can not run on Asterisk.
Does anyone know another method for this?
Thanks in advanced.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
