Hi, With the current CVS as of last night 20:00GMT
I was testing a asterisk with the e100p card using a PRI analyzer to excerise the 30 channels over and over, just going directly to voice-mail. Basically, I don't know what is going on but every time a PRI channel is picked up about 8K memory is used, but it is never released, I ran the test for about four hours last night, and th server started with 100Mb usage, and after 4 hours the memory usage had climbed to 270Mb. After some research and a few changes this is my current observation 1st Observation: After the memory leak was discovered I turned astmm on and recompiled *. The 'show memory allocations' and 'show memory summary' commands did not indicate that any of the * internals were growing during the test run. 2nd Observation: When I first boot the system (mod probes for zaptel and wct1xxp and * are run up from rc.local and there are no ISDN calls running) the memory is already leaking by 8Kb every few seconds. If I stop * and then restart it the "memory leak" stops until I start making ISDN calls... Does anyone have any advice to release the memory or stop the leak? Thanks Robb -- Robert Boardman Tel:01617737929 IAXTel:17007737929 FWD:82623 -- Robert Boardman Tel:01617737929 IAXTel:17007737929 FWD:82623 _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
