> When calling out on a Cisco 7960 there is a short delay before the call
> gets setup and the other side can hear your voice.
> Anyone know how to compensate for this effect?
Sounds like the 7960 has not been configured with a dialplan that supports
your * dialplan. Look for the dialplan.xml file on your tftp server and
check its contents. Should look something like the following:
<DIALTEMPLATE>
<TEMPLATE MATCH="0" Timeout="1" User="Phone"/> <!-- Local operator-->
<TEMPLATE MATCH="911" Timeout="0" User="Phone"/> <!-- Local numbers-->
<TEMPLATE MATCH="3..." Timeout="0" User="Phone"/> <!-- Corporate Dial plan-->
<TEMPLATE MATCH="4,4......" Timeout="0" User="Phone"/> <!-- Local numbers-->
<TEMPLATE MATCH="5,4......" Timeout="0" User="Phone"/> <!-- Local numbers-->
</DIALTEMPLATE>
The first entry, above, says if the user dialed "0", then wait for one second
to ensure they didn't dial something like "0-555-1212". If no other digits
dialed, the 7960 is supposed to send "0" to asterisk after that 1-second timeout.
The third entry says my local * extensions are four-digit numbers starting with
a "3". If the user dial 3111, the 7960 should immediately send that to * (no
timeout).
Rich
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
