Looks like the hookstate is listed as offhook. I don't think chan_dahdi will attempt to make a call out a device that is offhook.
Hope that helps, Matthew Fredrickson On Tue, Jun 7, 2016 at 1:36 PM, Brent Davidson <[email protected]> wrote: > In trying to troubleshoot the Delay after Answer problem I had before (which > seems to be fixed), I have somehow created a new problem: > > Outgoing calls are now failing with the following message: > > [Jun 7 13:28:09] WARNING[9247][C-00000000]: app_dial.c:2429 dial_exec_full: > Unable to create channel of type 'DAHDI' (cause 0 - Unknown) > > But I DO have working dahdi as incoming calls are working correctly. > > CLI> dahdi show channels > Chan Extension Context Language MOH Interpret > Blocked In Service Description > pseudo default default > Yes > 3 mainmenu default > Yes > 4 mainmenu default > Yes > CLI> dahdi show status > Description Alarms IRQ bpviol CRC Fra > Codi Options LBO > Wildcard AEX410 OK 0 0 0 CAS > Unk 0 db (CSU)/0-133 feet (DSX-1) > CLI> dahdi show channel 3 > Channel: 3 > Description: > File Descriptor: 14 > Span: 1 > Extension: > Dialing: no > Context: mainmenu > Caller ID: > Calling TON: 0 > Caller ID name: > Mailbox: none > Destroy: 0 > InAlarm: 0 > Signalling Type: FXS Kewlstart > Radio: 0 > Owner: <None> > Real: <None> > Callwait: <None> > Threeway: <None> > Confno: -1 > Propagated Conference: -1 > Real in conference: 0 > DSP: no > Busy Detection: yes > Busy Count: 8 > Busy Pattern: 0,0,0,0 > TDD: no > Relax DTMF: yes > Dialing/CallwaitCAS: 0/0 > Default law: ulaw > Fax Handled: no > Pulse phone: no > HW Gains (RX/TX): Disabled/Disabled > SW Gains (RX/TX): 0.00/0.00 > Dynamic Range Compression (RX/TX): 0.00/0.00 > DND: no > Echo Cancellation: > 128 taps > (unless TDM bridged) currently OFF > Wait for dialtone: 0ms > Actual Confinfo: Num/0, Mode/0x0000 > Actual Confmute: No > Hookstate (FXS only): Offhook > CLI> > > dahdi show channel 4 > Channel: 4 > Description: > File Descriptor: 15 > Span: 1 > Extension: > Dialing: no > Context: mainmenu > Caller ID: > Calling TON: 0 > Caller ID name: > Mailbox: none > Destroy: 0 > InAlarm: 0 > Signalling Type: FXS Kewlstart > Radio: 0 > Owner: <None> > Real: <None> > Callwait: <None> > Threeway: <None> > Confno: -1 > Propagated Conference: -1 > Real in conference: 0 > DSP: no > Busy Detection: yes > Busy Count: 8 > Busy Pattern: 0,0,0,0 > TDD: no > Relax DTMF: yes > Dialing/CallwaitCAS: 0/0 > Default law: ulaw > Fax Handled: no > Pulse phone: no > HW Gains (RX/TX): Disabled/Disabled > SW Gains (RX/TX): 0.00/0.00 > Dynamic Range Compression (RX/TX): 0.00/0.00 > DND: no > Echo Cancellation: > 128 taps > (unless TDM bridged) currently OFF > Wait for dialtone: 0ms > Actual Confinfo: Num/0, Mode/0x0000 > Actual Confmute: No > Hookstate (FXS only): Offhook > > The Hookstates always say offhook for some reason, though I'm not sure why. > > My setup: > > Server running Asterisk 13.9.1, Dahdi 2.11.1 w/ OSLEC > Server is CentOS 7 > Quad core CPU with 16GB Ram > 2 Snom 300 phones. > NO NAT. Server and phone are on the same subnet with only a gigabit switch > between them. > Digium AEX410P analog card with 2 incoming analog PSTN lines > > Any ideas? > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Matthew Fredrickson Digium, Inc. | Engineering Manager 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
