Hello Francisco,
you have to use:
extensions => odbc,asterisk
only if you want use dialplan in Realtime
can you share your sorcery.conf file?
Regards
El 13/06/2016 a las 10:21, Francisco Valentin Vinagrero escribió:
Hi all,
(sending this again from the correct address)
I’m running Asterisk 13.8.0 (I need to check if that happens with
13.9.1 too when I have the time to build it) with PJSIP realtime config.
I’ve defined several aors in the table ps_aors, like this (real url
replaced by myurl):
*CLI> pjsip show aor pbx-node-1
Aor: <Aor..............................................>
<MaxContact>
Contact: <Aor/ContactUri............................> <Hash....>
<Status> <RTT(ms)..>
=========================================================================================
Aor: pbx-node-1 0
Contact: pbx-node-1/sip:myurl:5060 771bf6a7d4 Created 0.000
ParameterName : ParameterValue
===================================================
authenticate_qualify : false
contact : sip:myurl:5060
default_expiration : 3600
mailboxes :
max_contacts : 0
maximum_expiration : 7200
minimum_expiration : 60
outbound_proxy : sip:myurl:5060
qualify_frequency : 30
qualify_timeout : 3.000000
remove_existing : false
support_path : false
So I think that those aors should be qualified automatically when I
run Asterisk, but if I do “/pjsip show contacts”/, I get that it was
just Created but not qualified:
*CLI> pjsip show contacts
Contact: <Aor/ContactUri..............................> <Hash....>
<Status> <RTT(ms)..>
=========================================================================================
Contact: pbx-node-1/sip:myurl:5060 771bf6a7d4 Created 0.000
And not a single OPTIONS message if I take a trace…
If I want Asterisk to start sending OPTIONS, I need to do pjsip reload
and after that, they are qualified and their status changes dynamically:
*CLI> pjsip show contacts
Contact: <Aor/ContactUri..............................> <Hash....>
<Status> <RTT(ms)..>
=========================================================================================
Contact: pbx-node-1/sip:myurl.ch:5060 771bf6a7d4 Avail 8.833
The extconfig.conf file looks like this:
[settings]
ps_endpoints => odbc,asterisk
ps_auths => odbc,asterisk
ps_aors => odbc,asterisk
ps_domain_aliases => odbc,asterisk
ps_endpoint_id_ips => odbc,asterisk
ps_contacts => odbc,asterisk
extensions => odbc,asterisk
Any idea why I need to reload PJSIP if I want the aors to be qualified?
Cheers, Francisco.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
