Leandro Dardini wrote:
Hello,
I'd like to know if anyone of you is finding my same problems using any
recent asterisk version, after 13.7 / 13.8 with chan_sip.
If I use any recent asterisk version, after just few seconds asterisk
completely locks up, stopping processing SIP/UDP packets. Nothing is
written in the asterisk log, but if I run "netstat -nap | grep 5060" I
see the UDP buffer filled up.
If I step back to asterisk 13.2, then all is fine and asterisk is rock
solid.
I know I should use PJSIP and chan_sip is no more supported, but at this
point, if this is the working state of chan_sip, it should be completely
removed.
It's not the normal working state of chan_sip, in fact it hasn't really
been touched in any way that would cause this to happen and I haven't
seen any bug reports along these lines. I also know that FreePBX is
running both chan_sip and chan_pjsip and haven't experienced anything so
it may be isolated to you. If you follow the instructions on the wiki[1]
it will provide a backtrace which will show where chan_sip is hanging.
[1]
https://wiki.asterisk.org/wiki/display/AST/Getting+a+Backtrace#GettingaBacktrace-GettingInformationForADeadlock
--
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
