All, I upgraded to asterisk 13.10. I have minimal load on the box. 20-30 calls a day.
Right now, there are no calls on the box at all. top shows me this: PR 20 NI 0 VIRT 1570540 RES 84620 SHR 26296 S S %CPU 99.7 %MEM 8.4 TIME+ 3468:39 COMMAND asterisk When I run this command while true; do top -Hbc -p `pgrep asterisk` -n 1 && asterisk -rx "core show threads"; sleep 1; done I get this PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 29079 root 20 0 1570540 84620 26296 R 37.5 8.4 1178:31 asterisk 29010 root 20 0 1570540 84620 26296 R 31.2 8.4 1197:07 asterisk 29047 root 20 0 1570540 84620 26296 R 31.2 8.4 1186:48 asterisk Any ideas?? -------------------- Previous message -------------------- Hi all, I was using 13.5 but upgraded today to 13.9 (13.10 came out a few hours after I upgraded). On both 13.5 and 13.9 asterisk seems to use 100% of the CPU. This usually happens a few hours after starting asterisk. A restart of asterisk gets the CPU back down, but only for a little while. There asterisk box has no call traffic flowing through it, just 15 or so registrations. I'm sure this is not best practise but for now I am using chan_sip and pjsip at the same time. My pjsip endpoints are using TLS. I am not sure where to start looking in order to debug the CPU usage by asterisk and would very much appreciate some guidance. Kind regards, Chirag
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
