This shows that asterisk's IAX is already bound to all adapters - so that's good. Symptomatically does your IAX stop working? Or do you just see a warning?
-----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Vitor Mazuco Sent: Monday, August 29, 2016 8:46 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload Hi, see the log below root@AsteriskSlave:~# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1 valid_lft forever preferred_lft forever inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic valid_lft 86398sec preferred_lft 43198sec inet6 fe80::2e0:4cff:fe44:195/64 scope link valid_lft forever preferred_lft forever 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff and root@AsteriskSlave:~# netstat -anp | grep ast tcp 0 0 0.0.0.0:2000 0.0.0.0:* OUÇA 2050/asterisk tcp 0 0 0.0.0.0:5338 0.0.0.0:* OUÇA 2050/asterisk udp 0 0 0.0.0.0:38180 0.0.0.0:* 2050/asterisk udp 0 0 0.0.0.0:4520 0.0.0.0:* 2050/asterisk udp 0 0 0.0.0.0:4659 0.0.0.0:* 2050/asterisk udp 0 0 0.0.0.0:2727 0.0.0.0:* 2050/asterisk udp 0 0 0.0.0.0:5000 0.0.0.0:* 2050/asterisk udp 0 0 0.0.0.0:5089 0.0.0.0:* 2050/asterisk unix 2 [ ACC ] STREAM OUVINDO 484 2050/asterisk /var/run/asterisk/asterisk.ctl unix 2 [ ] DGRAM 11686 2050/asterisk 2016-08-26 19:21 GMT-03:00, Telium Technical Support <supp...@telium.ca>: > Could you post the result of "ip addr" command, and "netstat -anp | grep > ast" after the reload? > > I suspect something else is going on here... > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users