Your external addres seems wrong. As you are doing natting, you need to set to you external (natted behind firewall).
El 30/09/16 a les 13:07, aaberga/gmail ha escrit: > Hi, > > after a long pause (Asterisk 1.8 times), I have started again playing with > VOIP. A lot has changed since last time I did setup an Asterisk system! > > So I am asking for some help. > > ++++++++++++++++ > > PJSIP seems tougher.. > > So my problem is that I do have a test system up in the cloud, behind a > firewall. I am trying to make the “Hello World!” mandatory call between two > iPhones (with the Bria SIP client). > > Outcomes are erratic. > > ================ > > This is the pjsip.conf file: > > —————————————————————— > > [transport-udp-nat] > type=transport > protocol=udp > bind=0.0.0.0 > local_net=10.2.12.3/32 > local_net=127.0.0.1/32 > external_media_address=10.2.12.2 > external_signaling_address=10.2.12.2 > > ;===============Messagenet TRUNK > > [messagenet_reg] > type=registration > transport=transport-udp-nat > outbound_auth=messagenet_auth > server_uri=sip:[email protected]:5061 > client_uri=sip:[email protected]:5061 > > [messagenet_auth] > type=auth > auth_type=userpass > password=xxxxxxxx > username=xxxxxxxx > > [messagenet_aor] > type=aor > contact=sip:sip.messagenet.it:5061 > > [messagenet] > type=endpoint > transport=transport-udp-nat > context=messagenet_incoming > disallow=all > allow=ulaw > allow=alaw > outbound_auth=messagenet_auth > aors=messagenet_aor > > [messagenet_id] > type=identify > endpoint=messagenet > match=sip.messagenet.it > > ;===============Extension 2102 > > [2102] > type=endpoint > context=internal > ;disallow=all > allow=ulaw > allow=alaw > allow=g729 > transport=transport-udp-nat > auth=auth2102 > aors=2102 > rtp_symmetric=yes > force_rport=yes > ice_support=yes > direct_media=no > > > [auth2102] > type=auth > auth_type=userpass > password=xxxxxxxxxxxxxx > username=2102 > > [2102] > type=aor > max_contacts=1 > > ;===============Extension 2103 > > [2103] > type=endpoint > context=internal > ;disallow=all > allow=ulaw > allow=alaw > allow=g729 > transport=transport-udp-nat > auth=auth2103 > aors=2103 > rtp_symmetric=yes > force_rport=yes > ice_support=yes > direct_media=no > > [auth2103] > type=auth > auth_type=userpass > password=xxxxxxxxxxxxxx > username=2103 > > [2103] > type=aor > max_contacts=1 > > ================================ > > This is a trace of what I do see from the console. > > First I let the Bria clients connect. Then I try to call terminal 1 from > terminal 2. Most of the times there is no route to the destination, even if > it appears as an online AOR (whatever that means!! Ahhh: Good olde times of > Peer, Friend, etc… ;-) > > A couple of times I got a connection, with the typical one side only audio of > NAT traversal problems. > > BTW: The iPhones are behind TWO nats (one is given by the broadband router, > one by the WiFi router that gives a better WiFi cover for in-house things). > > My understanding is that I did something wrong in letting the phones > ‘register’ them as present and available to receive calls. > > If only I knew what is wrong… I have tried random combinations of > rtp_symmetric, force_rport, and friends; nothing final discovered... > > ==== > > Thanks in advance for any help, > Aldo > > > PS: Setting up Zoiper as IAX client works of course like a charm on the VOIP > side. The only catch is that Zoiper has less than optimal background support > on IOS… And I have no plan to make an IAX client myself! > > I want to get my old Asterisk apps back online and the VOIP client part makes > no sense to me.. > > -- Joan Aymà Departamento de SAT [email protected] <mailto:[email protected]> ackstorm <http://www.ackstorm.es> C/ Catalunya 72 Local, 08840 Viladecans - Barcelona 902 888 345 <tel:+34902888345> | [email protected] <mailto:[email protected]> | **ackstorm.es** <http://www.ackstorm.es> Follow us! Twitter <https://twitter.com/ackstormsl> LinkedIn <https://www.linkedin.com/company/ack-storm> Google+ <https://plus.google.com/106323983704675179490/about> Este mensaje electrónico contiene información de ACK STORM, S.L. que es privada y confidencial, siendo para el uso exclusivo de la persona(s) o entidades arriba mencionadas. Si usted no es el destinatario señalado, le informamos que cualquier divulgación, copia, distribución o uso de los contenidos está prohibida. Si usted ha recibido este mensaje por error, por favor borre su contenido y comuníquenoslo en la dirección [email protected] <mailto:[email protected]> -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
