I am trying to send SMS from my grandstream GXV3240 Asterisk receives the message in a NOTIFY block. How can I get asterisk to run dialplan code when receiving these Notify SMS Message Blocks. I can then route them to my SMS provider. Any ideas are appreciated. Below is debug of a message sent from the phone when received no dialplan code is triggered. I am wounding if I need to modify some setting in sip.conf or the peer config. Incomming SMS from my vendor works without issue and is transmitted to the phone.
<-------------> --- (10 headers 0 lines) --- Really destroying SIP dialog '[email protected]:5060' Method: NOTIFY <--- SIP read from UDP:XXX.XXX.XXX.XXX:57568 ---> MESSAGE sip:[email protected] SIP/2.0 Via: SIP/2.0/UDP 192.168.201.104:20093;branch=z9hG4bK1738682353;rport From: <sip:[email protected]>;tag=1683585926 To: <sip:[email protected]> Call-ID: [email protected] CSeq: 9430 MESSAGE Contact: <sip:[email protected]:20093> Max-Forwards: 70 User-Agent: Grandstream GXV3240 1.0.3.158 Supported: replaces, path, timer, eventlist Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER, UPDATE, MESSAGE Content-Type: text/plain; charset=UTF-8 Content-Length: 5 Test Message SMS <-------------> Thanks Bryant
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
