Thanks, from what I've gathered, remote disconnect supervision (hangup detection) requires kewl start signaling. I currently have loop start signaling ...will the telco change the signaling on the line ?
Or will the L36 firmware in the adtran make this work fine with loop start lines ? There seems to be conflicting opinions on this. I'm assuming FXO cards in the adtran 750 pushing incoming calls to a t100p will take care of my echo issues. Thanks, Chris ----- Original Message ----- From: "Tilghman Lesher" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, March 04, 2004 4:39 PM Subject: Re: [Asterisk-Users] adtran 750 + t100p > On Thursday 04 March 2004 15:19, Ariel Batista wrote: > > Chris Clifton wrote: > > > I've had some issues with the x100p in my * box with echo at the > > > beginning of calls and remote hangup detection. Question is, will > > > setting up an adtran for the pots lines and connecting this to a > > > t100p in * fix these issues ? > > > > > > Can anyone verify good call quality and remote hangup detection > > > on incoming / outgoing US pots lines with the 750 + t100p > > > combination ? > > Yes, it works fine. > > > The Adtran 750 is an FXS channel bank. It does not take single > > pots lines in. > > Actually, the Adtran 750 is an empty box that does virtually nothing > without cards to fit into its slots. There are both FXO as well as > FXS cards available for the Adtran 750. > > -Tilghman > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
