Dne 26/09/2017 v 22:33 Joshua Colp napsal(a):
On Tue, Sep 26, 2017, at 05:29 PM, marek cervenka wrote:
hi,
i want use asterisk+pjsip as voip client with multiple registrations
(perf testing)
i'm using this example configuration for one account
[308]
type=registration
outbound_auth=308
server_uri=sip:3...@example.com:5060
client_uri=sip:3...@example.com:5060
[308](auth-userpass)
username=308
password=pass
[308](aor-single-reg)
contact=sip:example.com:5060
[308](endpoint-basic)
outbound_auth=308
aors=308
[308]
type=identify
endpoint=308
match=example.com
my problem is contact on the other side (is same for all endpoints)
Addr->IP : 1.1.1.1:5060
Reg. Contact : sip:s@1.1.1.1:5060
all incoming calls from PBX to my Asterisk are routed to only one
account (because of same ip address/port ?)
how can i specify different source port or different contact address for
asterisk pjsip client with registration?
The "contact_user" option configures the user portion of the Contact
that is sent in the REGISTER. You can set it to a different value for
each registration.
ok i have this configuration now
client - asterisk+pjsip (public ip 1.1.1.1)
pjsip/307
pjsip/308
server - asterisk+chan_sip (public ip 2.2.2.2)
sip/307
Addr->IP : 1.1.1.1:5060
Reg. Contact : sip:307@1.1.1.1:5060
sip/308
Addr->IP : 1.1.1.1:5060
Reg. Contact : sip:308@1.1.1.1:5060
now, every call from server to client is received through pjsip/307 .
but i need receive call for pjsip/308 through registration of pjsip/308.
is it possible?
is it possible configure different source port other than 5060?
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
