On Mon, 2 Oct 2017, Antony Stone wrote:
On Monday 02 October 2017 at 20:58:33, Steve Edwards wrote:
I recently received a GoIP-32 for a client project -- primarily outbound
calling.
How should a GoIP be configured for Asterisk?
Have you tried http://www.hybertone.com/en/solutionsClass.asp?Id=78
Thanks, but no joy.
When I first power up the box, 'sip show peers' shows:
Name/username Host Dyn Forcerport Comedia ACL Port Status
Description
goip/goip (Unspecified) D Yes Yes 0 OK (5 ms)
But then a few seconds later it shows:
Name/username Host Dyn Forcerport Comedia ACL Port Status
Description
goip/goip (Unspecified) D Yes Yes 0 UNKNOWN
Every few seconds I get 'empty' SIP debug messages on the console like:
<--- SIP read from UDP:192.168.0.51:5087 --->
<------------->
Wireshark says they're only 3 bytes long and contain 'SIP'.
When I dial, I get:
-- Executing [*@newline:6] Dial("SIP/poly-e637-000000cb",
"sip/goip/xxxxxxxxxx") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
No SIP messages are displayed -- I'm guessing that's a result of the 'status
UNKNOWN'.
--
Thanks in advance,
-------------------------------------------------------------------------
Steve Edwards [email protected] Voice: +1-760-468-3867 PST
https://www.linkedin.com/in/steve-edwards-4244281
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
