Hi All,

I have installed a number of Digium G100 devices in many countries like South 
Korea, Japan, Singapore and Australia.  I have just installed two in New 
Zealand and both sites are having a problem with Caller ID.  Incoming calls are 
dropping the first digit 0 from the caller ID.  I was previously using DAHDI 
and a TE121 device which may have been adding the 0, I'm not too sure about 
that.

Anyhow, is it possible the Digium G100 is causing the problem or would it be 
the Telco not passing the full CID number?  I have the latest firmware on the 
G100, the same with all my other locations.  I am using the latest Asterisk 
13.19.0.

The Telco is blaming the PBX for the problem so I'm hoping someone here can 
shed some light.  Below is a debug extract which I hope will help.

The 21 number should be 021.


Jan 16 10:53:16 G100-59-c4-ca asterisk[4674]: VERBOSE[4786]: 
chan_gtw/chan.c:4803 in dgm_pri_message: port1 < Calling Number (len=12) [ Ext: 
0  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) 
(1)
Jan 16 10:53:16 G100-59-c4-ca asterisk[4674]: VERBOSE[4786]: 
chan_gtw/chan.c:4803 in dgm_pri_message: port1 <                           
Presentation: Presentation allowed of network provided number (3)  '21xxxxxx' ]
Jan 16 10:53:16 G100-59-c4-ca asterisk[4674]: VERBOSE[4786]: 
chan_gtw/chan.c:4803 in dgm_pri_message: port1 < [70 0a c1 30 34 39 31 34 31 32 
31 34]
Jan 16 10:53:16 G100-59-c4-ca asterisk[4674]: VERBOSE[4786]: 
chan_gtw/chan.c:4803 in dgm_pri_message: port1 < Called Number (len=12) [ Ext: 
1  TON: Subscriber Number (4)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) 
(1)  '049xxxxxx' ]

Jan 16 10:53:16 G100-59-c4-ca asterisk[4674]: VERBOSE[4786]: 
chan_gtw/sig_pri_new.c:5383 in pri_dchannel:     -- Accepting call from 
'21xxxxxx' to '049xxxxxx' on channel 0/5, span 1

Thanks
David.
-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Check out the new Asterisk community forum at: https://community.asterisk.org/

New to Asterisk? Start here:
      https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to