Hello,
I have an Asterisk 13-enabled system.
1. Using features.conf application map (or something else), is it possible
to define a single map matching several DTMF sequences, such as in the
imaginary example bellow ?
features.conf:
foobar => _*123.,peer,Gosub,"foobar,s,1"
_*123. would match DTMF sequences *1234 or *12345 or anything starting with
*123
2. I used the mapping bellow:
foobar => *123,peer,Gosub,"foobar,s,1"
In my diaplan, I edited something like:
[foobar]
exten = s,1,Read(FOO,silence/1)
same = n,Noop(FOO is ${FOO})
When I originate a call (with "channel originate Local/1@test/n" or
"channel originate Local/1@test") to an other Asterisk box which sends a
*123ww456 DTMF sequence, I can see that:
- the DTMF is coming in,
- its *123 prefix is recognized and triggers my foobar routine (see above)
- application Read is executed,
- next DTMF digits are coming in but are not read by Read application as if
I was reading on one channel and digits were coming in an other channel.
Any help on this ?
Best regards
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
