Thanks Richard, That did the trick. I had the 'overlapdial=yes' line farther down in the chan_dahdi.conf file. Moving up before the channel line worked.
Appreciate the help. matt On Thu, Apr 5, 2018 at 12:37 PM Richard Mudgett <[email protected]> wrote: > On Thu, Apr 5, 2018 at 7:20 AM, Mtt Cannon <[email protected]> wrote: > >> >> >> I am trying to setup Asterisk to act like a PBX connected via a PRI >> gateway to a voice netowrk where Asterisk is doing outbound >> overlap dialing for calls that terminate via that PRI. AFter researching >> through the archives and online dcocs, I thought I had >> everyting setup right, dialplan configured for '_X!' and the >> 'overlapdial=yes' in the chan_dahdi.conf file, but when I try and >> make a call, while the first digit triggers the outbound SETUP message, >> that SETUP message always includes a 'Sending Complete' >> parameter and any subsequent digits received from the originaing client >> seem to be getting ignored as opposed to sent over in >> subsequent ISDN INFORMATION messages. >> >> Any idea what I might be missing here...i did restart both DAHDI and >> Asterisk after making the changes to support overlap. >> >> Logs and snippets are below.. >> >> Thanks >> matt >> >> >> localhost*CLI> core show version >> Asterisk 15.2.0 built by root @ localhost.localdomain on a x86_64 running >> Linux on 2018-02-21 19:10:36 UTC >> >> >> chan_dahdi.conf >> >> ; Overlap dialing mode (sending overlap digits) >> ; Cannot be changed on a reload. >> ; >> ; incoming: incoming direction only >> ; outgoing: outgoing direction only >> ; no: neither direction >> ; yes or both: both directions >> ; >> overlapdial=yes >> > > Where is this option set in the chan_dahdi.conf file? To have any effect > on a particular channel the option > MUST be set before the channel line that creates the channel. > > [channels] > context=incoming > switchtype=euroisdn > signaling=pri_cpe > overlapdial=yes > > ; All options currently set are used to create the specified channels on > the next line. > channel=1-15,17-31 > ; Any options set AFTER the channel line above DO NOT affect those > channels. > > context=other > > Richard > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: > https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
