This has been super-helpful, Eric. However, the handleHangupByPeer priorities
below are still not run when the peer hangs-up. The last line in the cli
when the peer hangs-up is still:
Strict RTP learning complete - Locking on source address
(Although sometimes there is also: Retransmission timeout reached on
transmission)
same =>
n(callPeer),Set(GLOBAL(CB${IndexIntoPeers}CurrentCallsCount)=$[${PeerCurrentCallsCount}
+ 1])
; Ensure that hangup by caller/inbound-channel will invoke
handleHangupByCaller.
same => n,Set(CHANNEL(hangup_handler_push)=handleHangupByCaller,s,1(args))
same => n,Set(AddressToReachPeer=SIP/${EXTEN:0:4}@${PeerBeingConsidered})
; Ensure that the channel of the peer (i.e. outbound-channel) is
configured with hangup handler.
same =>
n,Dial(${AddressToReachPeer},,b(beforeDialingPeerConfigureItsChannelForPeerHangupHandling^s^1))
same => n,Hangup
[beforeDialingPeerConfigureItsChannelForPeerHangupHandling]
exten => s,1,Set(CHANNEL(hangup_handler_push)=handleHangupByPeer,s,1(args))
same => n,Return
[handleHangupByPeer]
; Ensure that GLOBAL(CB${IndexIntoPeers}CurrentCallsCount) is decremented
after hangup, and end-of-call-epoch is set.
exten => s,1,NoOp(${PeerBeingConsidered} peer channel: Entered
handleHangupByCallerOrPeer Calls ${CB${IndexIntoPeers}CurrentCallsCount})
same =>
n,Set(GLOBAL(CB${IndexIntoPeers}CurrentCallsCount)=$[${CB${IndexIntoPeers}CurrentCallsCount}
- 1])
same => n,Set(GLOBAL(${PeerBeingConsidered}EpochAtCallEnd)=${EPOCH})
same => n,Return
[handleHangupByCaller]
; Ensure that GLOBAL(CB${IndexIntoPeers}CurrentCallsCount) is decremented
after hangup, and end-of-call-epoch is set.
exten => s,1,NoOp(${PeerBeingConsidered} caller channel: Entered
handleHangupByCallerOrPeer Calls ${CB${IndexIntoPeers}CurrentCallsCount})
same =>
n,Set(GLOBAL(CB${IndexIntoPeers}CurrentCallsCount)=$[${CB${IndexIntoPeers}CurrentCallsCount}
- 1])
same => n,Set(GLOBAL(${PeerBeingConsidered}EpochAtCallEnd)=${EPOCH})
same => n,Return
When the caller hangs-up, handleHangupByCaller is run first, then
handleHangupByPeer
runs. (And strangely, the value of global CB${IndexIntoPeers}CurrentCallsCount
isn't accessible in handleHangupByPeer.)
Cheers,
David
On Tue, Jun 5, 2018 at 12:58 PM, Eric Wieling <[email protected]> wrote:
> Don't use the _. pattern. Ever.
>
> The call has two channels so it needs two hangup handlers, something like
> this, though I've not tested it.
>
> [some_context]
> exten => _X.,1,Noop
> same => n,Set(CHANNEL(hangup_handler_push)=my_caller_hangup_handler)
> same => n,Dial(SIP/number@peer,b(pre_dial^s^1))
> same => n,Hangup
>
> [pre_dial]
> exten => s,1,Set(CHANNEL(hangup_handler_push)=my_called_hangup_handler)
> same => Return
>
> See: https://wiki.asterisk.org/wiki/display/AST/Pre-Dial+Handlers
> and https://wiki.asterisk.org/wiki/display/AST/Hangup+Handlers
>
>
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
