I'm assuming that no one knows the answer to this.
Does anyone have fax detection successfully working? If so, can you
share your configuration?
Mitch
On 12/4/18 4:27 PM, Mitch Claborn wrote:
Asterisk 16 latest
DAHDI 3.0.0 latest
Excerpt from chan_dahdi.conf is shown below. I'm trying to enable fax
detection on inbound calls so that I can take appropriate action in the
dial plan. "dahdi show channel 1" shows "Fax Handled: no". Does that
mean that I don't have it configured correctly?
[channels]
; Span 1: WCTE2/0/1 "WCTE23X (PCI) Card 0 Span 1" (MASTER) ESF/B8ZS RED
group=10,11
context=from-pstn
switchtype = national
signalling = pri_cpe
faxdetect=incoming
faxdetect_timeout=0
faxbuffers => 12,half
channel => 1-23
; Span 2: WCTE2/0/2 "WCTE23X (PCI) Card 0 Span 2" ESF/B8ZS RED
group=10,12
context=from-pstn
switchtype = national
signalling = pri_cpe
channel => 25-47
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
