It seems that if there is a pause in the auto attendant longer than a second this problem occurs. I have this for an extension in my extensions.conf file:
exten => 2799,1,GotoIf($["${CALLERID(num)}" = "${EXTEN}"]?500) exten => 2799,2,Dial(PJSIP/${EXTEN},14,tr) exten => 2799,3,Dial(PJSIP/${EXTEN},1,tr) exten => 2799,4,BackGround(abandon-all-hope) exten => 2799,5,BackGround(dial-here-often) exten => 2799,6,Wait(2) exten => 2799,7,BackGround(gambling-drunk) exten => 2799,8,BackGround(you-seem-impatient) exten => 2799,9,BackGround(nobody-but-chickens) exten => 2799,10,BackGround(tt-somethingwrong) exten => 2799,11,BackGround(tt-weasels) exten => 2799,12,Voicemail(${EXTEN},ug(15)) exten => 2799,13,Voicemail(${EXTEN},bg(15)) exten => 2799,14,Hangup exten => 2799,500,VoicemailMain(${CALLERID(num)}) If I change the Wait to 1 the MagicJack will hear everything. If I change it to 2, nothing is heard from that point on. Chris On 6/1/20 8:43 AM, Chris Dos wrote: > I upgraded our Asterisk 13 LTS to Asterisk 16 Certified 16.8 yesterday and > converted form SIP to PJSIP using the python script as a start and then > mofiying from there. I ran into an issue when testing that incoming calls > from MagicJack would go silent after about 10 seconds. This happened while > in the automated attendant area. This problem did not occur with Asterisk > 13 LTS. I reverted PJSIP back to SIP and the problem still occurred, so > that was not it. > > We connect to Flowroute for our SIP provider. I added "force_avp = yes" to > the Flowroute endpoint section in the pjsip.conf and the problem appeared to > be solved after I tested it a dozen times. However, this morning this issue > has reappeared. Any thoughts on what might be causing this? > > My Flowroute pjsip.conf config: > [transport-udp] > type = transport > protocol = udp > bind = 0.0.0.0 > tos = cs3 > > [reg_us-west-wa.sip.flowroute.com] > type = registration > retry_interval = 20 > expiration = 120 > transport = transport-udp > outbound_auth = auth_reg_us-west-wa.sip.flowroute.com > client_uri = sip:12345...@us-west-wa.sip.flowroute.com > server_uri = sip:us-west-wa.sip.flowroute.com > > [auth_reg_us-west-wa.sip.flowroute.com] > type = auth > password = XXZZXXZZXXZZ > username = 12345678 > > [reg_us-west-or.sip.flowroute.com] > type = registration > retry_interval = 20 > expiration = 120 > transport = transport-udp > outbound_auth = auth_reg_us-west-or.sip.flowroute.com > client_uri = sip:12345...@us-west-or.sip.flowroute.com > server_uri = sip:us-west-or.sip.flowroute.com > > [auth_reg_us-west-or.sip.flowroute.com] > type = auth > password = XXZZXXZZXXZZ > username = 12345678 > > [reg_us-east-nj.sip.flowroute.com] > type = registration > retry_interval = 20 > expiration = 120 > transport = transport-udp > outbound_auth = auth_reg_us-east-nj.sip.flowroute.com > client_uri = sip:12345...@us-east-nj.sip.flowroute.com > server_uri = sip:us-east-nj.sip.flowroute.com > > [auth_reg_us-east-nj.sip.flowroute.com] > type = auth > password = XXZZXXZZXXZZ > username = 12345678 > > [reg_us-east-va.sip.flowroute.com] > type = registration > retry_interval = 20 > expiration = 120 > transport = transport-udp > outbound_auth = auth_reg_us-east-va.sip.flowroute.com > client_uri = sip:12345...@us-east-va.sip.flowroute.com > server_uri = sip:us-east-va.sip.flowroute.com > > [auth_reg_us-east-va.sip.flowroute.com] > type = auth > password = XXZZXXZZXXZZ > username = 12345678 > > [flowroute] > type = aor > contact = sip:12345...@us-west-wa.sip.flowroute.com > > [flowroute] > type = identify > endpoint = flowroute > match = 147.75.60.160/28, 34.210.91.112/28, 34.226.36.32/28, 147.75.65.192/28 > > [flowroute] > type = auth > username = 12345678 > password = XXZZXXZZXXZZ > > [flowroute] > type = endpoint > context = from-trunk > dtmf_mode = rfc4733 > allow = !all,ulaw > direct_media = no > from_domain = us-west-wa.sip.flowroute.com > tos_audio = ef > tos_video = af41 > ; Note: "force_avp = yes" fixes issues with calls coming from MagicJack with > no audio after a few seconds. > force_avp = yes > auth = flowroute > outbound_auth = flowroute > aors = flowroute > t38_udptl = yes > t38_udptl_ec = fec > > [anonymous] > type=endpoint > context = anonymous > allow = !all,ulaw >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users