Dne 25/11/2020 v 16:29 Joshua C. Colp napsal(a):
On Wed, Nov 25, 2020 at 11:24 AM marek <cervaj...@gmail.com
<mailto:cervaj...@gmail.com>> wrote:
tried chan_sip/udp + pjsip/tcp
but the same problem
sip.conf
[general]
udpbindport=5060
udpbindaddr=0.0.0.0
tcpenable=no
tlsenable=no
pjsip.conf
[transport-tcp]
type = transport
bind = 2.2.2.2:5070 <http://2.2.2.2:5070>
protocol = tcp
Loading res_pjsip.so.
[Nov 25 16:21:04] ERROR[5528]: res_pjsip/config_transport.c:664
transport_apply: Transport 'transport-tcp' could not be started:
Cannot
assign requested address
[Nov 25 16:21:04] ERROR[5528]: res_sorcery_config.c:420
sorcery_config_internal_load: Could not create an object of type
'transport' with id 'transport-tcp' from configuration file
'pjsip.conf'
anybody know if its possible preload pjsip before chan_sip? (tried
preload= but its complicated. a lot of dependecies)
You're assuming that the problem is an interaction between chan_sip
and chan_pjsip. If you don't load chan_sip at all, does the problem
still occur? If so then chan_sip isn't the problem but something most
likely system level - since the system stated that PJSIP could not use
the configured address.
ooh. typo in ip address :(
thanks a lot
so the scenario with chan_sip/udp + pjsip/tcp is working now
scenario chan_sip/udp + pjsip/udp on different port works now too
Marek
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users