On Wed, Mar 10, 2004 at 11:50:55AM -0800, Lee Howard said: > On 2004.03.10 10:18 Jim Sneeringer wrote: > > >Do you know if there is other fax software that supports ECM? > <snipped> > > Modems that I know of that support ECM in some fashion in Class > 2/2.0/2.1 are the MultiTech 5634 V92 family (MT5634ZBA-V92, ISI5634, > etc.), the Digi AccelePort RAS, and the Eicon Diva Server. There > probably are a few more, but yes, this is a very short list. Most > modems do not support ECM in their Class 2 firmwares.
Great info! FWIW, I wrote a mass-fax application for sending updated price lists to dealers a few years back. Had a bank of 6 modems. We did some testing where we used both USR modems and MultiTech. The USR modems had a transmission failure rate of around 10%, where the multitechs were about 2%. I had done some research at the time on fax modem recommendations, and the general concensus was that the multitechs were one of the best for fax, but the USR V.Everythings were better for data. Other than the wall-wart transformers going bad, the multitechs did well. We probably would have been better off with a rackmodem system, but we were cheap... :-) _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
