could you please post your zaptel.conf? You're right, maybe this has something to do with your clock source or timing
Thanks Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England Email: scott "at" evtmedia.com URL: www.evtmedia.com >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of >Nicolas Bougues >Sent: Thursday, March 11, 2004 8:06 PM >To: [EMAIL PROTECTED] >Subject: Re: [Asterisk-Users] PRI errors blocking Asterisk > >On Thu, Mar 11, 2004 at 04:48:42PM -0000, Scott Stingel wrote: >> Hi Nichoas- >> >> Are you are getting lots of frame re-transmission messages in >> /var/log/asterisk/messages as well? >> > >No. > >I get a few of these messages, though : > >Mar 11 16:11:11 WARNING[81926]: PRI: Read on 131 failed: >Unknown error 500 >Mar 11 16:11:11 NOTICE[81926]: PRI got event: 8 on span 2 >Mar 11 16:11:11 WARNING[81926]: PRI: Read on 131 failed: >Unknown error 500 >Mar 11 16:11:11 NOTICE[81926]: PRI got event: 8 on span 2 > >Note that I'm not sure about the timing settings on my board. The >board has (currently) 3 E1 spans connected, from 3 different >operators, all of them providing a clock (no guarantee they are >synchronised). > >Upon module loading, the driver says > >TE410P: Timing from source 0 > >I chose one (quite random) E1 span as a primary sync source in >zaptel.conf > >SPAN 3: Primary Sync Source > >I'm not sure how this setting is used. Do I really have to set one ? > >-- >Nicolas Bougues >Axialys Interactive >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
