Re: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum retries exceeded on call

James Sizemore Fri, 12 Mar 2004 08:59:29 -0800

I have noticed that sometimes you need to comment out profiles with
nat=yes on and then reload, then uncomment them and reload, for Asterisk
to clean out historical settings. Try that.  I have run phones before on
odd port with out trouble, so I don't think that is your problem.

AstGrp wrote:

Ok.. Let me start by saying that SJPhone works fine through NAT and the
Cisco phones inside the internal network work fine also... It's just the
Cisco phones on the outside using NAT.
For Testing I opened the Firewall open on the IP for the * Server.  I
have done, everything you recommended below, but still no go... When the
phone registers with port 2842?  Not the standard 5060?  Any ideas?  I
believe this is where my problem sits...
Thanks,

-gcc
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James
Sizemore
Posted At: Friday, March 12, 2004 9:03 AM
Posted To: Asterisk User Group
Conversation: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum
retries exceeded on call
Subject: Re: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum
retries exceeded on call
Make sure your using qualify=500 in the sip.conf along with nat=yes,
make sure any firewalls allow 5060 udp and tcp  and random ports above
10000 in form your PBX.
If you have all that it should work.

AstGrp wrote:
Yes ....

-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James Sizemore Posted At: Thursday, March 11, 2004 10:47 AM Posted To: Asterisk User Group Conversation: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum retries exceeded on call Subject: Re: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum retries exceeded on call
You do have :
nat_enable: "1"
nat_received_processing: "1"
On the Ciscos?

AstGrp wrote:

I am having a similar problem... I get the same message, but inbound calls can go through.... This is only Cisco phones that are behind
NAT.

I have tried your recommendations from below, but still no luck.. User can make outbound calls, just can't receive any. Any ideas would be greatly appreciated.. I even tried to change the timeout value in chan_sip, but it just waits longer to fail.. Just dosen't seem to want

to communicate...

Thanks,

gcc

-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Bittner Posted At: Tuesday, March 02, 2004 11:46 PM Posted To:

Asterisk
User Group Conversation: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum retries exceeded on call Subject: RE: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum retries exceeded on call

Are you using Cisco phones. ?

I had this issue with my cisco phones. I didn't had any issues with dropped calls. All I did to fix this was set a prefered_codex and set proxy_register to 0.

I hope this helps.
John Bittner
Simlab.net
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of dkwok Sent: Wednesday, March 03, 2004 7:04 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum retries
exceeded on call

*CLI> Mar 3 12:55:05 WARNING[1150495040]: chan_sip.c:495 retrans_pkt: Maximum retries exceeded on call [EMAIL PROTECTED] for seqno 102

(Request)
This has been brought up in the previous post but it does not seem to
have an answer for it so far.
I cvs the stable v1.0 this morning after compiling and installing I
have calls drop 1 minutes into the connection with the above message.
If anyone has any idea of this occurrence.

I have set up sip.conf:

canreinvite=no
--
David Kwok
Tel: 612 99292086 ext 1002
Iaxtel/FWD # 17001813482 ext 1002
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] chan_sip.c:495 retrans_pkt: Maximum retries exceeded on call

Reply via email to