voice mail. However, if I try to call "user2" from user1's X-Lite - or vice-versa - I get a "404 Not Found" error.
Is there anything obvious that I'm doing wrong? (In particular, do I also need to add entries to "extensions.conf" for "user1" and "user2"??)
Ross.
Try adding something similer to this in the default context of your extensions.conf:
exten => <your exten>,1,Dial(SIP/user1,20, tr)
exten => <your exten>,1,Dial(SIP/user2,20, tr)
Always remember that device names - peers, users, friends - in any channel are not the same as extensions. You call extensions (defined in extensions.conf) and the Dial application connects an extension to a device on a channel.
If you're used to a SIP proxy, this is not very easy to understand. I confuse myself regurlarly in this area.
You have to remember that Asterisk is a multiprotocol (VoIP and PSTN) PBX where we have to define a protocol-neutral layer to connect everything together. This layer is the dial plan in the file extensions.conf.
Believe me, you will appreciate it when you get the whole picture.
Welcome to the world of Asterisk!
/O _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users