On my system, "show application dial" doesn't mention a "d" option.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Wieling Sent: Tuesday, March 16, 2004 8:09 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Does anyone have faxes working well withX100P and TDM40B cards? "show application dial" On Tue, 2004-03-16 at 19:49, Jim Sneeringer wrote: > Thanks so much. This sounds encouraging. > > I can't find a description of the "d" option. What does it do? Do I just put > a "d" in the extension? Right now I have this: > > exten => fax,1,Dial(Zap/8) > > and I'm envisioning changing it to > > exten => fax,1,Dial(Zap/8/d${EXTEN}) > > Is that right? > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jonathan Biggs > Sent: Tuesday, March 16, 2004 6:55 PM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] Does anyone have faxes working well with X100P > and TDM40B cards? > > Have a HP Officejet combo working OK with inbound fax detection, receiving > faxes, and sending them using X100p and TDM400P, I just make sure I use the > "d" option on the dial string, for outbound and also inbound on the FAX > detection. > have the "d" option on the internal fax redirection, and have setup 8 as > outbound dialing for data calls (both modem and fax). > > Did have problems when I had a mailbox configured on the line with the > modem, seems the VMWI logic set line in a weird state the modem could not > detect dial tone. > > --- Jim Sneeringer <[EMAIL PROTECTED]> wrote: > > When I send or receive faxes with a modem, the faxes are stretched and > > have missing information. > > > > Here are the things I have tried so far: > > > > - verified that the 2.4 GHz P4 is not overloaded > > - tried different Asterisk channels for both FXO and FXS > > - turned off echocancel > > - bumped up rxgain and txgain > > - tried different fax software (Windows vs. WinFax) > > - confirmed that everything works fine when > > the faxes are not routed through Asterisk. > > > > One person told me I need ECM modems, but I don't have one to try and > > I can't see asking my customers to get new modems. > > Also, what if the other end > > of the connection doesn't have ECM? I would really like to get > > Asterisk to work with ordinary fax modems. > > > > Why does Asterisk not work as well with fax modems as any other phone > > system? > > > > Thanks. > > > > Jim > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- For Asterisk PBX related documentation go to http://www.digium.com/index.php?menu=documentation and look at the "Unofficial Links" section also see http://www.voip-info.org/wiki-Asterisk also see my site at http://www.fnords.org/~eric/asterisk/ BTEL Consulting _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
