Re: [Asterisk-Users] Q931 Message - Connect - Billing

[Daniel Bichara]

Hi Martin, I don't think I have any playback of answers in my extension. Please, check the following exten.conf: [default] exten => _X.,1,SetVar(VCOL=20) exten => _X.,2,SetVar(VPRL=0) exten => _X.,3,SetVar(VDIG=0${EXTEN}) exten => _X.,4,SetCIDNum(123456|a) exten => _X.,5,Wait(1) exten => _X.,6,Goto(dial,s,1)                                                                                 [dial] exten => s,1,ResetCDR() exten => s,2,Dial(IAX2/[EMAIL PROTECTED]/${DIG}) exten => s,3,Busy Thanks in advance, Daniel Martin Pycko wrote: If you have playback first before dialing the right extension on the other side then that's why you have the call answered right away ... Also voicemail answers and many other applications. Martin On Tue, 16 Mar 2004, Daniel Bichara wrote: Hi All, I have posted before asking for a Connect message sent from Zap (ISDN/PRI - by *) when receiving a call (incoming) and dialing to another extension. To clarify the situation, I will describe the problem: 1) My * box is connect to a Cisco (E1-ISDN/PRI) using a crosscable. 2) Sending a call (outbound) to Cisco, I receive Q931 "Connect (15)" message from Cisco only after the other side answer. 3) Receiving a call (inbound) from Cisco, I call an extension at another * connected via IAX2: X.,1,Dial(IAX2/[EMAIL PROTECTED]/${EXTEN}) Before the other side (${EXTEN} at 192.168.110.2) answer, * sends a Q931 "Connect (15)" message to Cisco and it starts billing the call. Cisco bills even if no one answer the other side or if its busy. I tried to setup "overlapdial=yes" at Zapata.conf but E1 disconnects by "Timeout" (T_313 expires - 4secs) before IAX2 complete the call. I noticed I get a message: "Progress Description: Called equipament is non-ISDN" from "pri debug span". Is that correct? Protocol Discriminator: Q.931 (8) len=14 Call Ref: len= 2 (reference 32770/0x8002) (Terminator) Message type: CONNECT (7) Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0 ChanSel: Reserved Ext: 1 Coding: 0 Number Specified Channel Type: 3 Ext: 1 Channel: 1 ] Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) Ext: 1 Progress Description: Called equipment i s non-ISDN. (2) ] -- IAX2[192.168.110.2:4569]/1 stopped sounds -- IAX2[192.168.110.2:4569]/1 is ringing Any clue? Thanks in advance. Daniel Bichara _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users