Hey all. We've just recently purchased a T100P in order to provide VoIP to a remote office. We've interfaced it with a DS1-formatter on our Mitel GX5000 switch. I realize that plugging the * PBX into this class 5 switch isn't the best situation to have in the world...but hey it's what we've got. We've just been having a couple of problems which I believe to be related, but can't figure out.
First of all, outgoing calls fail. The * box shows that it is dialing out, assigned to the proper group, however I never hear anything. The call will sit there idle as long as I allow it to. If I look at the status on the GX5000, it shows that channel as being "blocked", but will go back to "idle" the moment I hang up. Unfortunately I can't (it's possible but requires equipment that we don't have) monitor the GX to see what is happening when I place the call from the * box. The second problem, which I think to be caused by the same issue, has to do with hearing a ring. When placing a call from the outside that travels over that T1, to the * box, I can see the call being directed to the proper SIP location, it shows the phone as "ringing", and indeed the phone at the "receiving" end of the line is ringing. However the caller does not hear the ring...only dead air. While I know this is not a major issue, I'm sure it will lead some to believe that the call is not getting through since they don't hear the ringing on their phone. No I don't have a ton of experience with this stuff...but I am picking up a lot of concepts rather quickly...so please bear with me. Thanks for your help. Mark _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users