Question: since this is a local connection between the Definity and Asterisk on a crossover cable, could E1 PRI be used, even though we're in the US, to realize another 8 channels? I have TN464F cards that I will be using to connect with Asterisk.
Thanks, Mike
James Coberly wrote:
Jeb,
Do you know what slot it is in? Carrier A (top) or B (bottom)? We should take this off list though and reply to me directly from this point, since this is not really * related now.
There are 2 ways to do this:
At the system propmt type: list configuration ds1 (will list all DS boards in the system) list configuration all will give you all boards in the system. FInd the one related to the slot you are connected to.
Or if you have a restricted shell:
You can look at the back of the unit, locate the amphenol you connected, there is a no. (slot #) Locate the card on the front of the unit in that slot. Should be marked TNXXX
James-
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- Michael Welter Introspect Consulting, Inc. Denver, Colorado +1 303 674 2575 [EMAIL PROTECTED] www.introspect.com
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
