On Sun, 21 Mar 2004 09:11:33 -0800 (PST), suresh kumar <[EMAIL PROTECTED]> wrote:
<snip> >I would like to get some help from you. >My server ip is 192.168.1.1 and i would like to >connect to another ip 192.168.1.2. So how can i >specify the ip 192.168.1.2 so that make a call from >192.168.1.1? Basic configuration is described in the QUICKSTART that came with the binary. But, since you want to originate calls from the asterisk server, that's a bit different. I'm assuming that you have asterisk installed and working with your sound card. I'm also assuming that you still have the default extensions.conf. If so, you should be able to type dial 600 at the CLI prompt and get the echo test. If not, you'll have to get that fixed before going further. If you can dial extensions from the console OK, then just 1. Make and iax.conf entry for an extension [101] type=friend host=dynamic secret=foo context=default callerid="Remote PC" <101> diasallow=all allow=gsm 2. Make an extensions.conf entry for that extension in the default context exten => 101,1,Dial(IAX2/101) 3. Configure iaxComm on the other machine to use the iaxconf entry (username 101, password foo) as described in the QUICKSTART. > >Should i install softphone s/w in server (192.168.1.1) >and other machine (192.168.1.2)? You don't want iaxComm installed on the asterisk server. Just on the remote machines. > >In sip.conf file how can i specify the ip 102.168.1.2 iaxComm does not use the SIP protocol. It's config file is iax.conf > >If you have time, please help me to get a solution. > > >Thanks & Regards, >Suresh > > >--- Girish Gopinath <[EMAIL PROTECTED]> >wrote: >> Suresh, >> >> >From: suresh kumar <[EMAIL PROTECTED]> >> >Subject: RE: [Asterisk-Users] Can i do voice chat >> without using the >> >hardware >> >Date: Fri, 19 Mar 2004 05:50:00 -0800 (PST) >> > >> >Thanks a lot for your valuable information. I will >> go >> >through it once again. Still i don't have any idea >> to >> >connect two PC's. Hope i may get help from you. >> >> For configuring 2 softphones with Asterisk see this >> link: >> http://www.automated.it/guidetoasterisk.htm >> That helped me a lot in learning Asterisk. It >> explains configuring your sip >> phones with Asterisk. >> >> >Is there any softwares like X-lite for Linux? >> >> Yes, I think you can use linophone. But i was not >> able to install linophone >> because of some make issues. Also i have tested the >> softphone from zultys. >> It works well with Asterisk. You can get it from >> their web >> site:http://www.zultys.com >> >> Regards, Girish >> >> >_________________________________________________________________ >> Catch the formula fever! Get all the latest news. >> http://www.msn.co.in/formula2004/ Right here on MSN. >> >> _______________________________________________ >> Asterisk-Users mailing list >> [EMAIL PROTECTED] >> >http://lists.digium.com/mailman/listinfo/asterisk-users >> To UNSUBSCRIBE or update options visit: >> >> >http://lists.digium.com/mailman/listinfo/asterisk-users-users >> To UNSUBSCRIBE or update options visit: >> >http://lists.digium.com/mailman/listinfo/asterisk-users > > >__________________________________ >Do you Yahoo!? >Yahoo! Finance Tax Center - File online. File on time. >http://taxes.yahoo.com/filing.html >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
