RE: [Asterisk-Users] ztdummy

[Zac Amsler]

Looks like I am compiling a 2.4 kernel ;(   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Austin Sent: Tuesday, March 23, 2004 12:01 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] ztdummy   The USB core was completely rewritten in 2.6, and as such the functions that ztdummy depends on do not exist in 2.6.  I get the feeling that these changes are too much to easily fix ztdummy, so I don't expect to see it working on 2.6 any time soon (if ever)   I made some small changes to zaprtc to work on 2.6 and I have MoH and Meetme functions working fine in my lab.  For production I would accept the party line and buy a Digium card, but for lab work and prototyping, zaprtc meets my budget.   Dan   From: Zac Amsler [mailto:[EMAIL PROTECTED] Sent: Monday, March 22, 2004 8:05 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] ztdummy Hey all, I have an issue with compiling zaptel on my server.   I have a debian server with 2.6.4 kernel.   I am getting some errors when I try to load the module.   Installing module ztdummy. If the device isn't there, or isn't configured correctly, this could cause your system to pause for up to a minute.   FATAL: Error inserting ztdummy (/lib/modules/2.6.4/misc/ztdummy.ko): Unknown symbol in module, or unknown parameter (see dmesg) FATAL: Error running install command for ztdummy   Installation failed.   Please press ENTER when you are ready to continue.   I have compiled zaptel as::   Make clean Make linux26 Make install   Does anyone have any thoughts??     Zac Amsler   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ed Rubright Sent: Monday, March 22, 2004 9:46 PM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Call waiting   You need to send a hook flash to the PSTN line attached to the X100P.  This is done by:   hook-flash then *0   You'll need to have 3way calling enabled for it to work.   NOTE:  This info can be found in the wiki pages:  http://www.voip-ino.org/wiki-Asterisk   Ed   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Simon Brown Sent: Monday, March 22, 2004 7:28 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Call waiting I have a problem with call waiting which I cannot find an answer for in any of the information that I have searched through online. I cannot find anything in the list archives either.   My * server is connected to a PSTN line with an X100P. I have a call waiting service on this PSTN line which requires a hook flash signal to swap calls.   I have Cisco 7940 phones working with my * server. When on an outside call and another outside call comes in, I can hear the call waiting indicator, but cannot find any way of swapping calls (sending a hook flash signal through the X100P).   Any help would be greatly appreciated.   Simon Brown ----- This mail was content checked for malicious code and viruses by GFI MailSecurity.