Maybe I need to tweak the rxgain as I have problems with volume on the x100p anyway.
----- Original Message ----- From: "Steve Underwood" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, March 24, 2004 12:48 AM Subject: Re: [Asterisk-Users] Softfax problems > Hi Jon, > > It seems spandsp sees nothing meaningful from the remote modem, although > the remote modem seems to see the initial message from spandsp. You are > the first to report this. I have no idea what might be wrong. If spandsp > received any kind of noise from the other end it would at least show > slow carrier up. It only shows that during the initial exchange (a > number of times), and not thereafter. That shouldn't be the case. > > Regards, > Steve > > > Jon Creasey wrote: > > >All, > > > >Using CVS-03/05/04-17:17:29 asterisk > >Spandsp 0.0.1f > > > >Getting the following when faxes come in on x100p > > > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > > > >>>>DIS: 80 00 ce f0 80 80 01 > >>>> > >>>> > >T4 timeout in state 9 > >Sending ident > > > > > >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > >>>> > >>>> > >DIS: > >Preferred octets: 256 > >Can receive fax > >Supported data signalling rates: V.27ter and V.29 > >R8x7.7lines/mm and/or 200x200pels/25.4mm OK > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > > > >>>>DIS: 80 00 ce f0 80 80 01 > >>>> > >>>> > >HDLC underflow in state 9 > >Changed from phase 4 to 3 > >Slow carrier up > >Slow carrier down > >Slow carrier up > >Slow carrier down > >Slow carrier up > >Slow carrier down > >Slow carrier up > >Slow carrier down > >Slow carrier up > >Slow carrier down > >T2 timeout > >Start receiving document > >Changed from phase 3 to 4 > >Sending ident > > > > > >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > >>>> > >>>> > >DIS: > >Preferred octets: 256 > >Can receive fax > >Supported data signalling rates: V.27ter and V.29 > >R8x7.7lines/mm and/or 200x200pels/25.4mm OK > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > > > >>>>DIS: 80 00 ce f0 80 80 01 > >>>> > >>>> > >T4 timeout in state 9 > >Sending ident > > > > > >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > >>>> > >>>> > >DIS: > >Preferred octets: 256 > >Can receive fax > >Supported data signalling rates: V.27ter and V.29 > >R8x7.7lines/mm and/or 200x200pels/25.4mm OK > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > > > >>>>DIS: 80 00 ce f0 80 80 01 > >>>> > >>>> > > -- Hungup 'Zap/1-1' > > > > > >Message from the remote end (TPC.INT) > > > >Your facsimile job to +441142493154 was not sent because: > > DIS/DTC received 3 times; DCS not recognized > > > >The job will be retried at 17:08. > > > > ---- Transcript of session follows ---- > > > >Mar 23 17:03:57.37: [85585]: SESSION BEGIN 00864170 44114xxxxxx > >Mar 23 17:03:57.37: [85585]: HylaFAX (tm) Version 4.1.5 > >Mar 23 17:03:57.37: [85585]: SEND FAX: JOB 10266 DEST +441142xxxxxx COMMID > >00864170 DEVICE '/dev/cuac07' > >Mar 23 17:03:57.37: [85585]: DELAY 75 ms > >Mar 23 17:03:57.45: [85585]: DELAY 2600 ms > >Mar 23 17:04:00.06: [85585]: DELAY 10 ms > >Mar 23 17:04:00.08: [85585]: <-- [4:ATZ\r] > >Mar 23 17:04:00.41: [85585]: --> [3:ATZ] > >Mar 23 17:04:00.41: [85585]: --> [2:OK] > >Mar 23 17:04:00.41: [85585]: DELAY 3000 ms > >Mar 23 17:04:03.42: [85585]: <-- [5:ATE0\r] > >Mar 23 17:04:03.48: [85585]: --> [4:ATE0] > >Mar 23 17:04:03.48: [85585]: --> [2:OK] > >Mar 23 17:04:03.48: [85585]: <-- [5:ATV1\r] > >Mar 23 17:04:03.54: [85585]: --> [2:OK] > >Mar 23 17:04:03.54: [85585]: <-- [5:ATQ0\r] > >Mar 23 17:04:03.60: [85585]: --> [2:OK] > >Mar 23 17:04:03.60: [85585]: <-- [7:ATS0=0\r] > >Mar 23 17:04:03.66: [85585]: --> [2:OK] > >Mar 23 17:04:03.66: [85585]: <-- [7:ATS8=2\r] > >Mar 23 17:04:03.72: [85585]: --> [2:OK] > >Mar 23 17:04:03.72: [85585]: <-- [8:ATS7=60\r] > >Mar 23 17:04:03.78: [85585]: --> [2:OK] > >Mar 23 17:04:03.78: [85585]: <-- [6:AT&E4\r] > >Mar 23 17:04:03.84: [85585]: --> [2:OK] > >Mar 23 17:04:03.84: [85585]: <-- [6:AT&D3\r] > >Mar 23 17:04:03.90: [85585]: --> [2:OK] > >Mar 23 17:04:03.90: [85585]: <-- [6:AT&C1\r] > >Mar 23 17:04:03.96: [85585]: --> [2:OK] > >Mar 23 17:04:03.96: [85585]: <-- [12:AT+FCLASS=2\r] > >Mar 23 17:04:04.02: [85585]: --> [2:OK] > >Mar 23 17:04:04.02: [85585]: <-- [10:AT+FTBC=0\r] > >Mar 23 17:04:04.08: [85585]: --> [2:OK] > >Mar 23 17:04:04.08: [85585]: <-- [10:AT+FBOR=0\r] > >Mar 23 17:04:04.14: [85585]: --> [2:OK] > >Mar 23 17:04:04.14: [85585]: <-- [13:AT+FPHCTO=30\r] > >Mar 23 17:04:04.20: [85585]: --> [2:OK] > >Mar 23 17:04:04.20: [85585]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r] > >Mar 23 17:04:04.27: [85585]: --> [2:OK] > >Mar 23 17:04:04.27: [85585]: <-- [5:ATM0\r] > >Mar 23 17:04:04.33: [85585]: --> [2:OK] > >Mar 23 17:04:04.33: [85585]: <-- [12:AT+FCLASS=2\r] > >Mar 23 17:04:04.49: [85585]: --> [2:OK] > >Mar 23 17:04:04.49: [85585]: <-- [10:AT+FTBC=0\r] > >Mar 23 17:04:04.65: [85585]: --> [2:OK] > >Mar 23 17:04:04.65: [85585]: <-- [10:AT+FBOR=0\r] > >Mar 23 17:04:04.81: [85585]: --> [2:OK] > >Mar 23 17:04:04.81: [85585]: <-- [13:AT+FPHCTO=30\r] > >Mar 23 17:04:04.97: [85585]: --> [2:OK] > >Mar 23 17:04:04.97: [85585]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r] > >Mar 23 17:04:05.14: [85585]: --> [2:OK] > >Mar 23 17:04:05.14: [85585]: <-- [25:AT+FLID="Demon Internet"\r] > >Mar 23 17:04:05.31: [85585]: --> [2:OK] > >Mar 23 17:04:05.32: [85585]: DIAL 01142493154 > >Mar 23 17:04:05.32: [85585]: <-- [17:[EMAIL PROTECTED] > >Mar 23 17:04:23.07: [85585]: --> [5:+FCON] > >Mar 23 17:04:25.40: [85585]: --> [28:+FCSI:" "] > >Mar 23 17:04:25.41: [85585]: REMOTE CSI "" > >Mar 23 17:04:25.41: [85585]: --> [21:+FDIS:1,3,0,0,1,0,1,0] > >Mar 23 17:04:25.41: [85585]: --> [2:OK] > >Mar 23 17:04:25.41: [85585]: REMOTE best rate 9600 bit/s > >Mar 23 17:04:25.41: [85585]: REMOTE max page width 1728 pixels in 215 mm > >Mar 23 17:04:25.41: [85585]: REMOTE max A4 page length (297 mm) > >Mar 23 17:04:25.41: [85585]: REMOTE best vres 7.7 line/mm > >Mar 23 17:04:25.41: [85585]: REMOTE best format 2-D MR > >Mar 23 17:04:25.41: [85585]: REMOTE best 0 ms/scanline > >Mar 23 17:04:25.41: [85585]: USE 9600 bit/s > >Mar 23 17:04:25.41: [85585]: USE 0 ms/scanline > >Mar 23 17:04:25.41: [85585]: SEND file "docq/doc15408.ps;31" > >Mar 23 17:04:25.41: [85585]: USE page width 1728 pixels in 215 mm > >Mar 23 17:04:25.41: [85585]: USE A4 page length (297 mm) > >Mar 23 17:04:25.41: [85585]: USE 7.7 line/mm > >Mar 23 17:04:25.41: [85585]: USE 1-D MR > >Mar 23 17:04:25.41: [85585]: <-- [24:AT+FDIS=1,3,0,0,0,0,0,0\r] > >Mar 23 17:04:25.57: [85585]: --> [2:OK] > >Mar 23 17:04:25.58: [85585]: <-- [7:AT+FDT\r] > >Mar 23 17:04:44.76: [85585]: --> [8:+FHNG:26] > >Mar 23 17:04:44.76: [85585]: REMOTE HANGUP: DIS/DTC received 3 times; DCS > >not recognized (code 26) > >Mar 23 17:04:45.04: [85585]: --> [2:OK] > >Mar 23 17:07:45.05: [85585]: MODEM <Timeout> > >Mar 23 17:07:45.05: [85585]: <-- [5:ATH0\r] > >Mar 23 17:07:45.21: [85585]: --> [2:OK] > >Mar 23 17:07:45.22: [85585]: SESSION END > > > >Anyone have any ideas. > > > >Jon > > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
