Bill Hamel wrote:
Hi,
I am running FC1 with latest patches of 3/30/04, and I have the latest CVS as of this morning 3/30/04 of asterisk, zap and libpri.
The SIP device I am using is a Sipura SPA-2000 with G726-32 "Forced".
When I 'make clean" and recompiled zaptel, libpri, asterisk and start asterisk I can see:
[format_g726.so] [format_g726.so] => (Raw G.726 (16/24/32/40kbps) data) == Registered file format g726-40, extension(s) g726-40 == Registered file format g726-32, extension(s) g726-32 == Registered file format g726-24, extension(s) g726-24 == Registered file format g726-16, extension(s) g726-16
This is the support for reading/writing raw G.726 (all rates) data from/to files. It is not the G.726 codec. The codec is the codec_g726.so module (32 Kbps only).
I 'Ass'ume this indicates that g726 is installed..
So in my sip.conf I put many variations of what I thought should go in there, finally includeing (to no avail):
disallow=all allow=g726-40 allow=g726-32 allow=g726-24 allow=g726-16 allow=g726 allow=ima-adpcm
You should allow "g726" only.
(Also tried G.726-xx etc... ) And none seem to work because when I dial out I get
Mar 30 15:49:29 WARNING[-1137677392]: chan_sip.c:2128 process_sdp: No compatible codecs!
I must not be putting the correct "allow=" value in sip.conf or possibly missing
something.
Can anyone point me in the right direction ?
Thanks -bh
Michael.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
