Same as mine. Do you know off the top of your head what firwmare you're using? Also, what RAS card do you have on your PCAnywhere side?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ariel Batista Sent: Wednesday, April 07, 2004 10:39 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Dial-In/Out Modem Zap Channel Config. Adtran 750 Bisker, Scott (7805) wrote: > I've been trying to get a Win 2000 RAS server working with my > asterisk PBX for quite some time, to no avail. I've googled, I've > tried loads of configurations, I've rewired phone lines, and still I > am not winning the battle. > > Here's my config. > > PRI->T400P->Asterisk->T400P->Adtran 750(L36 Firmware)->RAS Server. > > > I have 4 Zap channels signalled FXO_KS to the 750 with FXS_LS > channels, On-Hook messaging disabled, the rest defaults for the > channels. In zapata.conf I've tried with both busydetect=>yes and > busydetect=>no.... busycount=>6, busycount=>10, callprogress=>yes, > callprogress=>no all combinations. > We have 4 750's and one TSU 600 working with PC anywhere for data communications for our support department. We have on this system 2 T400P's. The only thing I can say is who are you getting your timing from. We are able to get modem calls and faxes without problems. But this is only using PRI from Allegenice. We also have a LD service T1 from Sprint that is in no way able to handle any data calls. Our Adtrans are out of the box without any changes to them. This is our settings in our zapata.conf. ; Enable echo cancellation echocancel=yes ;echocancelwhenbridged=yes immediate=no ;adsi=yes usecallerid=yes hidecallerid=no ;callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes musiconhold=default signalling = fxo_ks Hope this helps. > The weird thing is, that if I forward the incoming call from the PRI > out another channel on the PRI into a POTS line hooked into the RAS > server, the connection is fine. In my view, that rules out the PRI > and points the blame at either how the adtran is configured, or the > how the channel itself is configured. > > Can anyone with a _working_ configuration similar to this chime in > with some config info on the Zap channel and the channel bank config? > > Thanks in advance. > > -sb > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users