Hi Jeremy, Thanks for the response. I made a call just before the hourly reset of all the B-channels. And when it came time for the reset, it did all the channels but the one I was using.
So this was not our problem :(( We have one other error (twice today) we get "Out of trunk data space on call number xxxx, dropping" How do I determine what is causing this error? we have a point-to-point T1 between 2 * boxes, with 3 phone in the remote office. I have no idea how the trunk could be out of space. The end goal is trying to figure why we are dropping calls! THanks for any insight. lach ----- Original Message ----- From: "Jeremy McNamara" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 07, 2004 12:54 PM Subject: Re: [Asterisk-Users] B-channels resetting every 60 minutes? > osx wrote: > > >Hello, > > > >As you can see are pri is being reset every 60 minutes! Is there a way to > >stop this?? Is it a Zapata configuration problem? > > > >We have a * box with a single port T1/pri card installed. > > > > > > This is an expected and desired behavior. > > > Jeremy McNamara > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
