I have set up a new SwissVoice phone and it can receive calls but I cannot
make calls out from it. The setup is simple for now, 2 phones: SwissVoice
is ext 7726 and Cisco 7960 (SIP) is ext 7999.
I can call from the Cisco phone and it rings on the SwissVoice phone but
when I dial from the SwissVoice phone I get a busy tone upon dialing the
second digit. The log reads as follows:
-- Endpoint 'aaln/[EMAIL PROTECTED]' observed 'hd'
-- MGCP mgcp_new(MGCP/aaln/[EMAIL PROTECTED]) created in state: Down
-- Endpoint 'aaln/[EMAIL PROTECTED]' observed '7'
-- Endpoint 'aaln/[EMAIL PROTECTED]' observed '9'
-- Endpoint 'aaln/[EMAIL PROTECTED]' observed 'hu'
-- MGCP handle_request(aaln/[EMAIL PROTECTED]) ast_channel already
destroyed
-- MGCP handle_request(aaln/[EMAIL PROTECTED]) set vmwi(-)
Here are my configuration files:
MGCP.conf
===========
[10.1.24.112]
context=local
host=10.1.24.112
callerid = "Brad Chilton <7726>"
callgroup=0,2-5
canreinvite=no
pickupgroup=0,1
nat=no
threewaycalling=yes
transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to
transfer
;callwaiting=yes ; this might be a cause of trouble for ip10s
;cancallforward=yes
line => aaln/1
EXTENSIONS.conf
===============
exten => 7726,1,Dial(MGCP/aaln/[EMAIL PROTECTED],20,tr)
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
