Hi Steve and all !
Unable to send fax from * to a fax machine...
File name is '/root/faxes/8400100-1081935748.808.tif'
Changed from phase 0 to 2 Slow carrier up Slow carrier down Slow carrier up <<< NSF: 20 00 00 11 80 00 8a 49 10 43 53 43 20 54 45 4c 45 43 4f 4d 20 20 20 20 20 00 7b 00 80 80 80 06 01 01 01 01 NSF without final frame tag The remote is made by 'Canon' <<< CSI: 40 31 35 36 31 30 32 37 31 37 33 30 30 20 20 20 20 20 20 20 20 CSI without final frame tag Remote fax gave CSI as: "003717201651" <<< DIS: 80 00 ee a8 c4 80 10 DIS with final frame tag In state 10 DIS: Preferred octets: 256 Can receive fax Supported data signalling rates: V.27ter, V.29 and V.17 R8x7.7lines/mm and/or 200x200pels/25.4mm OK 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) and B4 (364mm) Receiver's minimum scan line time: 10ms at 3.85 l/mm: T7.7 = T3.85 Error correction mode T.6 coding Metric-based resolution preferred Minimum scan line time for higher resolutions: T15.4 = T7.7 DCS: Selected data signalling rate: V.29, 9600bps 2D coding OK Scan line length: 215mm Recording length: A4 (297mm) Minimum scan line time: 10ms Start sending document Start tx document - compression 2 Fine mode Changed from phase 2 to 4 Sending ident >>> TSI: 43 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 >>> DCS: 83 00 c4 20 HDLC underflow in state 3 Changed from phase 4 to 6 Changed from phase 6 to 3 Slow carrier up <<< XCN: fa XCN with final frame tag In state 4 Disconnecting Changed from phase 3 to 7 Changed from phase 7 to 8 |
- [Asterisk-Users] Re: SoftFAX/spandsp Reynaldo Simbulan
- Re: [Asterisk-Users] Re: SoftFAX/spandsp Steve Underwood
- [Asterisk-Users] RE: SoftFAX/spandsp Reynaldo Simbulan
- [Asterisk-Users] SoftFAX/spandsp reseaux
- Re: [Asterisk-Users] SoftFAX/spandsp Rob Fugina
- Re: [Asterisk-Users] SoftFAX/spandsp Steve Underwood
- Serge Oleinikov