Hi Steven, Thank you for your reply.
My system is a dual PIII-850 on a SuperMicro motherboard (440BX chipset). There is one 3com 3c905B installed and an ATI Rage 128 for console video. An onboard ESS1969 chipset is present, however, I am not using it (nor would I want to) and no drivers are loaded for it; it just shows up in a 'cat /proc/pci'. I have two IDE harddrives in software RAID1 and the last device in my system is the T100P. I'm running a plain vanilla 2.4.25 SMP kernel, asterisk v0.7.2, libpri v0.5.2, zapata v0.9.0, zaptel v0.9.0, iax v0.2.2. Everything has been compiled with GCC 3.2. The PRI is hooked up to the PSTN, and I have a handful of SIP phones connected over ethernet. It's just about as basic as you can get. The PRI is configured for ESF/B8ZS, externally clocked, line build-out is 0db (I've also confirmed the tx/rx levels are good with the berd). I hope something on my list throws up a red flag for someone out there. :) As always, any help is appreciated. - Eric On Mon, 19 Apr 2004 15:22:14 -0500 Steven Critchfield <[EMAIL PROTECTED]> wrote: > You've done a great job describing your problem with the exception of > documenting all the hardware in the system and software versions. As a > way of eliminating some of the questionable parts, you must enumerate > that part of your setup. Also, where is your T100P pointing to, telco, > pbx, or some other hardware? > -- > Steven Critchfield <[EMAIL PROTECTED]> > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
