On Wednesday 21 April 2004 12:03 pm, kiran p wrote: > Hi > > My motto is to connect two computers on the same > network with Voip without using any special hardware,i > have downloaded Asterisk, I was suggested to use > LinPhone as a soft phone as it is very easy to install > > I have installed Asterisk on my computer and iam using > it as a server. > > And whe i DAIL 1234 at CLI i get the following errors > repeatedly > > Apr 21 17:29:13 WARNING[1167272128]: chan_oss.c:272 > sound_thread: Failed to write sound > Apr 21 17:29:13 WARNING[1167272128]: chan_oss.c:181 > send_sound: Unable to read output space I had the same error; very frustrating. The source was a hardware incompatibility with the VIA sound chip on the motherboard (a Tyan S2495). I disabled the motherboard's built-in sound, put in a soundcard from my old machine (a SoundBlaster PCI 128), and the sound works now. If you have a sound card available, you may want to test putting the sound card in your machine (with the built-in sound disabled).
> One more doubt i have is after installing a soft phone > on the client,how do i configure it to connect to > Asterisk. I'm new to this part of Asterisk, yet I believe you need to add configuration for your softphone in sip.conf. You should see: http://www.voip-info.org/wiki-Asterisk+sip+channels > And how do i know,if Asterisk is recognizing the sound > card or not If you have the demo configurations loaded, you can dial (from the console): [EMAIL PROTECTED] and hear the congradulations message. Anon _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users