Try following the instructions atThe problem is I don't seem to have a reference to the format of that file or what options I can put in it. Some docs I've looked at reference the distribution.zip file as having some default templates. However the Polycom cd that came w/ the phone has not such zip file.. :( I'll need that zip file, any ideas on where to get it.
http://www.voip-info.org/wiki-Polycom+Phones
I think you don't have your MACADDRESS.cfg file set right. I've never used the web interface.
Also upon looking things over I setup a ftp server BUT the RH9 box I was running would NOT add user named 'PlcmSpIp' in. Upper case letters just wouldn't work. So I put in the user 'plcmspip' and then manually put in the upper case letters in /etc/passwd and /etc/shadow...
In the future I 'should' be able to change that to something other then the default values. I've search over the menus(pressing menu, settings, authentication) gave the a 'reg user' and password. I changed that to
user: 110 password: test
but the 0004f200b70e-boot.log still says its using u=PlcmSpIp pw=PlcmSpIp to log in. Ideas on how to fix that?
If it still doesn't work after that, write back.Sorry - the Cisco phones had cruddy docs to. While the polycom phone itself looks better, better display, more buttons, better menus - the docs are still lacking..
John
P.S. Make sure you use a good xml editor when fixing up the cfg files.
Have any suggestings? I've always used vi....
-- Rock River Internet Roger Grunkemeyer 202 W. State St, 8th Floor [EMAIL PROTECTED] Rockford, IL 61101 815-968-9888 x101
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
