Others correct me if I'm wrong, but I believe that:
Presumably, you have lines like:
exten => _XXX,1,Dial(SIP/${EXTEN})
exten => _9NXXXXXX,1,Dial(ZAP/1/${EXTEN:1})
exten => _91NXXNXXXXXX,1,Dial(Zap/1/${EXTEN:1})
if none of your internal extensions start with a nine (ie if they are in
the range 000-899 or smaller), try changing the first to:
exten => _[0-8]XX,1,Dial(SIP/${EXTEN})
or even narrower as your needs require
This way, * doesn't have to wait for you to stop dialing to distinguish
between outgoing 918185551212 and extension 918.
Hope this helps!
-Chris
On Fri, 23 Apr 2004 14:39:28 -0500, "Roger" <[EMAIL PROTECTED]> said:
> Users withing the office can dial a 3 digit extension and that will ring
> a phone. The problem I'm running into is you have to press xxx then
> press 'send or 'dial'. The pbx doesn't recognize a 3 digit number as an
> internal extension and automatically dial it the user has to initiate
> that call. Asterisk automatically initiates calls w/ 9+7 digits and LD
> calls, 9+1+areacode+number.
>
> How would you tell the PBX try an extension once and 3 digits have been
> pressed. The exception being 9 as that gives a outside line.
>
> --
> Rock River Internet Roger Grunkemeyer
> 202 W. State St, 8th Floor [EMAIL PROTECTED]
> Rockford, IL 61101 815-968-9888 x101
>
>
> _______________________________________________
> Asterisk-Users mailing list
> [EMAIL PROTECTED]
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
