Hi Felix, on some UK public switches I have seen similar bad call setup problems with a release cause of 28 (Invalid number format) when using:
pridialplan=national Have you tried: pridialplan=unknown in zapata.conf? It seems as though the omission of the pridialplan= statement in zapata.conf is treated by Asterisk as pridialplan=national. We could probably give you more relevant suggestions if you would enable a more verbose level of output and post the call setup trace results here. Try the following command from the Asterisk CLI before making your next call: pri debug span x Where x = single integer digit for the PRI span that will be used to make the outgoing call. (Eg. 1) Please drop a note to the list (either way) with your results. HTH Darren -- Comgate Telco>Internet<Broadcast -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of ePyron Felix Deierlein Sent: 09 May 2004 20:32 To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] No outbound calls at a PRI possible Hello, i guess the problem ist pridialplan from zapata.conf with pridialplan = local it works :-). But I still get the error messages: > Calling Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) > Presentation: Unknown (67) '' ] > Called Number (len= 9) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '899312' ] What pridialplan should I use with an E1 with Euroisdn from the German Telekom (DTAG or T-Com). Thanks Felix > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > ePyron Felix Deierlein > Sent: Sunday, May 09, 2004 6:48 PM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] No outbound calls at a PRI possible > > Hello all, > > the scenario: > > Carrier ----S2M------ * -----S2M------Siemens > | > | > SIP Clients > and many other features > > With much help from the list, the PRI links are without > alarms and inbound calls are working fine (from both: Carrier > and Siemens). > > But I am not able to dial wether outbound nor to the Siemens PBX. > I allways get the message: > == Everyone is busy at this time > > > After hours of googling and reading and trying I seek help... > > Thank you very much. > > Felix Deierlein > > > My extension.conf (only important parts): > [AtInternal] > ;exten => 402,1,Macro(stdexten,402,Zap/g2/402) > exten => 402,1,Dial(Zap/g2/595402) > > [ePInternal] > include=>system > include=>test > include=>AtInternal > > exten => 812,1,Macro(stdexten,812,${ePFfd}) > exten => 814,1,Macro(stdexten,814,${ePFjw}) > exten => 854,1,Macro(stdexten,854,${ePFch}) > exten => 5950,1,Macro(stdexten,812,${ePFfd}) > exten => _0.,1,Dial(Zap/g1/${EXTEN:1},60) > > > [zapata.conf] > [channels] > language=en > context=default > switchtype=euroisdn > ;pridialplan=national > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain=0.0 > txgain=0.0 > callgroup=1 > pickupgroup=1 > immediate=no > > ;pridialplan=national > switchtype = euroisdn > signalling = pri_cpe > group = 1 > channel => 1-15 > channel => 17-31 > > > immediate=no > > switchtype = euroisdn > signalling = pri_net > group = 2 > callgroup=2 > pickupgroup=2 > channel => 32-46 > > my zaptel.conf > #amt (carrier) > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > bchan=17-31 > #hicom (siemens) > span=2,1,0,ccs,hdb3,crc4 > bchan=32-46 > dchan=47 > bchan=48-62 > loadzone=uk > defaultzone=uk > channel => 48-62 > > > PRI Debugging Infos: > Call to Carrier: (Destination was 899312) > -- Executing Dial("SIP/ePfd-b455", "Zap/1/899312|60") in new stack > -- Making new call for cr 32774 > > Protocol Discriminator: Q.931 (8) len=40 Call Ref: len= 2 > (reference > > 6/0x6) (Originator) Message type: SETUP (5) Bearer > Capability (len= 3) > > [ Ext: 1 Q.931 Std: 0 Info transfer > capability: Speech (0) > > Ext: 1 Trans mode/rate: 64kbps, > > circuit-mode > (16) > > Ext: 1 User information layer > 1: A-Law > > (35) Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, > > Exclusive > Dchan: 0 > > ChanSel: Reserved > > Ext: 1 Coding: 0 Number Specified > Channel Type: > 3 > > Ext: 1 Channel: 1 ] Display (len= 6) > [ 1Felix ] > > Calling Number (len= 7) [ Ext: 0 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) > > Presentation: Presentation permitted, user > number not screened (0) '812' ] > > Called Number (len= 9) [ Ext: 1 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '899312' ] > > Sending Complete (len= 0) > -- Called 1/899312 > < Protocol Discriminator: Q.931 (8) len=14 < Call Ref: len= > 2 (reference 32774/0x8006) (Terminator) < Message type: STATUS (125) > < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: > Public network serving the local user (2) > < Ext: 1 Cause: Info. element nonexist or > not implemented > (99), class = Protocol Error (6) ] > < Cause data 0: 14 (20) > < Cause data 1: 01 (1) > < Call State (len= 1) [ Ext: 0 Coding: CCITT (ITU) standard > (0) Call state: > Call Initiated (1) > -- Processing IE 8 (Cause) > -- Processing IE 20 (Call State) > < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len= > 2 (reference 32774/0x8006) (Terminator) < Message type: CALL > PROCEEDING (2) < Channel ID (len= 5) [ Ext: 1 IntID: > Implicit, PRI Spare: 0, Exclusive > Dchan: 0 > < ChanSel: Reserved > < Ext: 1 Coding: 0 Number Specified > Channel Type: > 3 > < Ext: 1 Channel: 1 ] > -- Processing IE 24 (Channel Identification) < Protocol > Discriminator: Q.931 (8) len=13 < Call Ref: len= 2 > (reference 32774/0x8006) (Terminator) < Message type: DISCONNECT (69) > < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: > Public network serving the local user (2) > < Ext: 1 Cause: Invalid number format (28), > class = Normal > Event (1) ] > < Progress Indicator (len= 2) [ Ext: 1 Coding: CCITT (ITU) > standard (0) 0: > 0 Location: Public network serving the local user (2) > < Ext: 1 Progress Description: Inband > information or appropriate pattern now available. (8) ] > -- Processing IE 8 (Cause) > -- Processing IE 30 (Progress Indicator) > -- Channel 1, span 1 got hangup > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect > Indication, peerstate Disconnect Request > > Protocol Discriminator: Q.931 (8) len=9 Call Ref: len= 2 > (reference > > 6/0x6) (Originator) Message type: RELEASE (77) > > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: > Private network serving the local user (1) > > Ext: 1 Cause: Normal Clearing (16), class > = Normal > > Event > (1) ] > -- Hungup 'Zap/1-1' > == No one is available to answer at this time < Protocol > Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference > 32774/0x8006) (Terminator) < Message type: RELEASE COMPLETE > (90) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, > peerstate Null NEW_HANGUP DEBUG: Destroying the call, > ourstate Null, peerstate Null May 9 19:09:50 > WARNING[360466]: pbx.c:1836 ast_pbx_run: Timeout, but no rule > 't' in context 'ePInternal' > > > And the same for the Siemens Hicom: > > -- Executing Dial("SIP/ePfd-36d8", "Zap/g2/595402") in new stack > -- Making new call for cr 32770 > > Protocol Discriminator: Q.931 (8) len=29 Call Ref: len= 2 > (reference > > 2/0x2) (Originator) Message type: SETUP (5) Bearer > Capability (len= 3) > > [ Ext: 1 Q.931 Std: 0 Info transfer > capability: Speech (0) > > Ext: 1 Trans mode/rate: 64kbps, > > circuit-mode > (16) > > Ext: 1 User information layer > 1: A-Law > > (35) Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, > > Preferred > Dchan: 0 > > ChanSel: Reserved > > Ext: 1 Coding: 0 Number Specified > Channel Type: > 3 > > Ext: 1 Channel: 1 ] Calling Number > (len= 4) [ > > Ext: 0 TON: Unknown Number Type (0) NPI: > Unknown Number Plan (0) > > Presentation: Unknown (67) '' ] Called > > Number (len= 9) [ Ext: 1 TON: National Number (2) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '595402' ] > > Sending Complete (len= 0) > -- Called g2/595402 > < Protocol Discriminator: Q.931 (8) len=10 < Call Ref: len= > 2 (reference 32770/0x8002) (Terminator) < Message type: CALL > PROCEEDING (2) < Channel ID (len= 5) [ Ext: 1 IntID: > Implicit, PRI Spare: 0, Exclusive > Dchan: 0 > < ChanSel: Reserved > < Ext: 1 Coding: 0 Number Specified > Channel Type: > 3 > < Ext: 1 Channel: 1 ] > -- Processing IE 24 (Channel Identification) < Protocol > Discriminator: Q.931 (8) len=9 < Call Ref: len= 2 (reference > 32770/0x8002) (Terminator) < Message type: DISCONNECT (69) > < Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: > Private network serving the remote user (5) > < Ext: 1 Cause: Destination out of order > (27), class = > Normal Event (1) ] > -- Processing IE 8 (Cause) > -- Channel 1, span 2 got hangup > -- Zap/32-1 is circuit-busy > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect > Indication, peerstate Disconnect Request > > Protocol Discriminator: Q.931 (8) len=9 Call Ref: len= 2 > (reference > > 2/0x2) (Originator) Message type: RELEASE (77) > > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) > 0: 0 Location: > Private network serving the local user (1) > > Ext: 1 Cause: Normal Clearing (16), class > = Normal > > Event > (1) ] > -- Hungup 'Zap/32-1' > == Everyone is busy at this time > < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 > (reference 32770/0x8002) (Terminator) < Message type: RELEASE > COMPLETE (90) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate > Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, > ourstate Null, peerstate Null > == Everyone is busy at this time > No such command '==' (type 'help' for help) > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
