The sethdlc and sethdlc-new programs are in the zaptel directory on CVS. Depending on your kernel, one of them won't compile.
Somewhere I read that the "new" hdlc in 2.5.x was backported to 2.4.20 or 2.4.21. So I went back to 2.4.19 and hdlc works fine--I have four channels voice, 19 data, and the dchan on a T-1 crossover cable.
Contact me off list and I'll send the configs.
MW
Michael A Rowley wrote:
Hello all,
My set up is a fractionated t1, with 1-6 voice channels, 21-24 data channels. I have a t100P installed in a amd 1500 with 512meg.
Question: In order to set up the data channels, is the following correct?
1) compile new kernel with generic hdlc support
2) compile hdlc from hq.pm.waw.pl/hdlc
3) uncomment KFLAGS+=DConfig_ZAPATA_NET in zaptel makefile
4) compile zaptel,
5 compile rest of asterisk
6) add following to zaptel.conf
span=1,0,0,esf,b8zs
e&m=1-6
nethdlc=21-24
7) sethdlc hdlc0 hdlc_net
(I know there is supposed to be a parity and another setting, but bugger if I know that they mean... Any help would be appreciated!)
8) should now be able to access data on hdlc0
Does this sound at all correct? Any suggestions, things I am missing? There is damn little documentation on this, so most of this I am pulling from my short hairs.
Michael Rowley
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
-- Michael Welter Introspect Telephony Corp. Denver, Colorado +1 303 674 2575 [EMAIL PROTECTED] www.introspect.com
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
